ASME B16.5 Stainless Steel Threaded Flange
One Of The Top Manufacturer Of ASME B16.5 Screwed Flanges In India, One Of India’s Largest Suppliers Of DIN 2576 600LB FF Type Carbon Steel Threaded Flanges
Contact For Best EN 1092-2 PN16 Stainless Steel Screwed Flange At Low-price, Check Din pn16 Class 300 Threaded Flange Dimensions In MM And Weight Chart, One Of The Fastest Growing Manufacturer Of DN15~DN150 Raised Face Threaded Flange.
ASME B16.5 Stainless Steel Threaded Flange range from ½ inch to 4 inches in common usage. They have threads which make them be screwed onto the pipe rather than be welded. ASME B16.5 Screwed Flanges can be used in systems where welding is not possible. The threaded Flanges dimensions vary according to the needs but their diameters are usually below NPS 4 standard. Some threaded Flanges pn16 can withstand pressures up to 16 bars. There are different types such as the threaded reducing Flanges which could be used to thread in two pipes of different diameters. The national pipe threaded or npt threaded Flanges are a variation of flanges.
Stainless Steel Threaded Flange
ASME B16.5 Screwed Flanges
Carbon Steel Threaded Flanges
Table of contents
- What is Stainless Steel Threaded Flange?
- ASME B16.5 Carbon Steel Screwed Flange Price List In India
- Specification Of Copper Threaded Flange
- Threaded Pipe Flange Material
- Types Of ASME B16.5 Threaded Flange
- ASME B16.5 Threaded Pipe Flange
- ASME B16.5 Screwed Flange
- ANSI B16.5 Threaded Flange Plate
- ASME B16.47 Series a Threaded Flange Adapter
- ASME B16.47 Series b 2 Inch Threaded Pipe Flange
- Stainless Steel 150 Threaded Flange Dimensions
- Stainless Steel Class 300 Screwed Flange Dimensions
- EN 1092 1 Raised Face Threaded Flange
- PN16 Npt Threaded Flange
- Forged Reducing Threaded Flange
- AWWA C207 Class d Din 2566 Threaded Flange
- MSS SP-44 Brass Threaded Flange
- ASME B16.5 Stainless Steel Threaded Flange Dimensions
- 150# Threaded Flange Dimensions
- Class 300 Threaded Flange Dimensions
- Stainless Steel Threaded Flange 600#
- Threaded Floor Flange Dimensions
- NPS 1/2 Threaded Flange Dimensions
- NPS 3/4 Threaded Flange Dimensions
- NPS 1 Threaded Flange Dimensions
- NPS 1.1/4 Threaded Flange Dimensions
- ASME B16.5 Threaded Flange Pressure Ratings
- Dimensional Tolerances of Stainless Steel Screwed Flanges
Exporter Of ASTM A105 Carbon Steel 1/2 Npt Flange in India, Since 1997, We Have Been Supplyed ASME B16.47 Series a 2 inch Threaded Pipe Flange, Male And ASTM A182 F304 Female Threaded Flange Price List in Mumbai, ANSI B16.5 Class 150 Bsp Threaded Flange Stockholder.
The npt threaded Flanges manufacturer produces them in different capacities. They are also used to thread in PVC pipes. There are different grades such as the threaded flange din 2566. A stainless steel threaded flange can also be welded if the application permits. The welding provides extra sealing of the connection but not necessarily increasing the strength of the connection. This type is called weld on threaded flange and is not common in chemical or oil and gas applications where explosion is a threat.
What is Stainless Steel Threaded Flange?
reducing threaded flange could be used to connect two pipes of different diameters through the bore to make a joint. There’s a fair deviation of threaded flange price in india due to the supply and demand factors, including the transportation costs and locations. npt threaded flange are common in plumbing applications. Where welding is not a problem and pressures are high, threaded weld neck flange could be used and welded to seal the connection for extra strength and leakage proof. The range of a105 threaded flange is also available in different pressure classes such as ansi 150 threaded flange dimensions. Depending on the need to fit different sizes of pipes together, the reducing threaded flange ASME B16.5 is also used. Their applications include all types of fluid flow systems and hydraulics.
ASME B16.5 Carbon Steel WNRF Flange Price List In India
| SR NO | Description | PRICE (USD$) | |||
| 1 | Flange 4" 150 RF Threaded Carbon Steel A/SA105 | $10 | |||
| 2 | Flange 4" 600 RF Threaded Carbon Steel A/SA105 | $42 | |||
| 3 | Flange 6" 150 RF Threaded Carbon Steel A/SA105 | $12.67 | |||
| 4 | Flange 2" RF Threaded Carbon Steel A/SA105 | $3.07 | |||
| 5 | Flange 2" 600 RF Threaded Carbon Steel A/SA105 | $12.78 | |||
| 6 | Flange 3" 150 RF Threaded Carbon Steel A/SA105 | $8.80 | |||
| 7 | Flange 3" 600 RF Threaded Carbon Steel A/SA105 | $28.78 | |||
Please note this is an approx Price of ASME B16.5 Carbon Steel Threaded Flange in Mumbai, India. For final Black Pipe Threaded Flange Price List Please Call on or drop an Email to [email protected]
Specification Of Copper Threaded Flange
| Threaded Pipe Flange Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Threaded Flange/ Screwed Flange |
|---|---|
| JIS Threaded Flange Plate | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Threaded Flange/ Screwed Flange |
| UNI Threaded Flange Adapter | 6Bar 10Bar 16Bar 25Bar 40Bar Threaded Flange/ Screwed Flange |
| EN 2 Inch Threaded Pipe Flange | 6Bar 10Bar 16Bar 25Bar 40Bar Threaded Flange/ Screwed Flange |
| ASME B16.5 Screwed Flange Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| Threaded Flange/ Screwed Flange Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Threaded Flange/ Screwed Flange |
| ASME B16.5 Threaded Flange Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Threaded Flange/ Screwed Flange, ASME Threaded Flange/ Screwed Flange, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, BS Threaded Flange/ Screwed Flange, DIN Threaded Flange/ Screwed Flange, EN Threaded Flange/ Screwed Flange, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| 2 Inch Threaded Flange Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Threaded Flange/ Screwed Flange |
| Most common types of Female Threaded Flange | Forged / Threaded / Screwed / Plate |
| Special design 3 Inch Threaded Flange | As per your drawing AS, ANSI, BS, DIN and JIS |
| Raised Face Threaded Flange Test | Direct-reading Spectrograph, UI trasonic flaw detector, Hydrostatic testing machine, X-ray detector, Magnetic particle detector |
| Equipment Npt Threaded Flange | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin Of stainless steel screwed flanges | Indian / West Europe / Japan / USA / Korean |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Manufacturer of Stainless Steel Threaded Flange | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
| Threaded Flange/ Screwed Flange Uses & application |
|
| 4 Inch Threaded Flange Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Export to ASME B16.5 Threaded Flange | Ireland, Canada, USA, Brazil, Thailand, Korea, Iran, India, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Egypt, Oman, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
| ASME B16.5 NPT Threaded Flanges Manufacturer In India | |
MD Exports LLP is ISO: 9001, 14001 & OHSAS: 18001 Certified approved of high quality ASME/ ANSI/ DIN/ JIS standard ASME B16.5 Stainless Steel Threaded Flange manufacturers or ANSI B16.5 carbon steel screwed flanges Suppliers in India. B16.5 Aluminum Threaded Flange are widely used in low pressure piping systems, as no welding is involved while connecting the flanges to pipes or other equipment. We offer immediate delivery programs for standard size of Copper Threaded Flange and Ductile Iron Threaded Flange.
Threaded Pipe Flange Material
| Carbon Steel Threaded Flange | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
|---|---|
| 254 Smo Threaded Flanges/ Screwed Flanges | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
| Nimonic Threaded Flanges/ Screwed Flanges | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Other Threaded Flanges/ Screwed Flanges material | Tin bronze, Alumunum bronze, Lead bronze |
| Stainless Steel Screwed Flange | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Alloy Steel Threaded Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
| Titanium Screwed Flanges | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper Threaded Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Aluminium Screwed Flanges | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Monel Screwed Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Alloy 20 Threaded Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Incoloy Threaded Flanges/ Screwed Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
| Nickel Threaded Flanges/ Screwed Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Duplex Threaded Flanges/ Screwed Flanges | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex Threaded Flanges/ Screwed Flanges | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Copper Nickel Screwed Flanges | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
| Brass Threaded Flanges | 3602 / 2604 / H59 / H62 / etc. |
| Inconel Threaded Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Flanges |
| Hastelloy Screwed Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
| ASME B16.5 Stainless Steel Threaded Flange Manufacturer In India | |
Types Of ASME B16.5 Threaded Flange
ASME B16.5 Threaded Pipe Flange
1 in. 150# 316L Stainless Steel Full Face Threaded Flange
ASME B16.5 Screwed Flange
2 x 7-1/2 in. 125# Black Cast Iron Threaded Flange
ANSI B16.5 Threaded Flange Plate
2 in. 125# Black Cast Iron Threaded Flange
ASME B16.47 Series a Threaded Flange Adapter
1-1/2 in. 150# Threaded Schedule 80 Webb PVC Flange
ASME B16.47 Series b 2 Inch Threaded Pipe Flange
1 in. 300# 316L Stainless Steel Raised Face Threaded Flange
Stainless Steel 150 Threaded Flange Dimensions
1 in. 300# 304L Stainless Steel Raised Face Threaded Flange
Stainless Steel Class 300 Screwed Flange Dimensions
4 in. 150# 304L Stainless Steel Threaded Flange
EN 1092 1 Raised Face Threaded Flange
3/4 in. 316L Stainless Steel Raised Face Threaded Flange
PN16 Npt Threaded Flange
1 x 1/2 in. 150# Carbon Steel Raised Face Threaded Flange
Forged Reducing Threaded Flange
2 in. 300# Carbon Steel Threaded Flange
AWWA C207 Class d Din 2566 Threaded Flange
1 in. 600# Raised Face Carbon Steel Threaded Flange
MSS SP-44 Brass Threaded Flange
3 x 1-1/2 in. Raised Face 300# Carbon Steel Threaded Flange
ASME B16.5 Stainless Steel Threaded Flange Dimensions
| Pipe Size
(NPS) |
Outside Diameter of Flange
A |
Diameter of Raised Face
B |
Thickness of Flange
C |
Diameter of Hub at Base
J |
Length of Hub
L |
Minimum Thread Length
N |
Number of Bolt Holes
|
Approx. Weight
(Lbs.) |
|---|---|---|---|---|---|---|---|---|
| 1/2 | 3 1/2 | 1 3/8 | 7/16 | 1 3/16 | 5/8 | 5/8 | 4 | 2 |
| 3/4 | 3 7/8 | 1 11/16 | 1/2 | 1 1/2 | 5/8 | 5/8 | 4 | 2 |
| 1 | 4 1/4 | 2 | 9/16 | 1 15/16 | 11/16 | 11/16 | 4 | 2 |
| 1 1/4 | 4 5/8 | 2 1/2 | 5/8 | 2 5/16 | 13/16 | 13/16 | 4 | 3 |
| 1 1/2 | 5 | 2 7/8 | 11/16 | 2 9/16 | 7/8 | 7/8 | 4 | 3 |
| 2 | 6 | 3 5/8 | 3/4 | 3 7/16 | 1 | 1 | 4 | 5 |
| 2 1/2 | 7 | 4 1/8 | 7/8 | 3 9/16 | 1 1/8 | 1 1/8 | 4 | 7 |
| 3 | 7 1/2 | 5 | 15/16 | 4 1/4 | 1 3/16 | 1 3/16 | 4 | 8 |
| 3 1/2 | 8 1/2 | 5 1/2 | 15/16 | 4 13/16 | 1 1/4 | 1 1/4 | 8 | 11 |
| 4 | 9 | 6 3/16 | 15/16 | 5 5/16 | 1 5/16 | 1 5/16 | 8 | 13 |
| 5 | 10 | 7 5/16 | 15/16 | 6 7/16 | 1 7/16 | 1 7/16 | 8 | 15 |
| 6 | 11 | 8 1/2 | 1 | 7 9/16 | 1 9/16 | 1 9/16 | 8 | 19 |
| 8 | 13 1/2 | 10 5/8 | 1 1/8 | 9 11/16 | 1 3/4 | 1 3/4 | 8 | 30 |
| 10 | 16 | 12 3/4 | 1 3/16 | 12 | 1 15/16 | 1 15/16 | 12 | 43 |
| 12 | 19 | 15 | 1 1/4 | 14 3/8 | 2 3/16 | 2 3/16 | 12 | 64 |
| 14 | 21 | 16 1/4 | 1 3/8 | 15 3/4 | 2 1/4 | 2 1/4 | 12 | 85 |
| 16 | 23 1/2 | 18 1/2 | 1 7/16 | 18 | 2 1/2 | 2 1/2 | 16 | 93 |
| 18 | 25 | 21 | 1 9/16 | 19 7/8 | 2 11/16 | 2 11/16 | 16 | 120 |
| 20 | 27 1/2 | 23 | 1 11/16 | 22 | 2 7/8 | 2 7/8 | 20 | 155 |
| 22 | 29 1/2 | 25 1/4 | 1 13/16 | 24 | 3 1/8 | 3 1/8 | 20 | 159 |
| 24 | 32 | 27 1/4 | 1 7/8 | 26 1/8 | 3 1/4 | 3 1/4 | 20 | 210 |
150# Threaded Flange Dimensions
| Drilling | ||||||||
|---|---|---|---|---|---|---|---|---|
| Nominal Bore Threaded Flanges | Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Height1(H) | Nbr | Holes | Dia.(C) |
| 1/2″ | 90 | 9.6 | 35.05 | 30 | 14 | 4 | 15.87 | 60.3 |
| 3/4″ | 100 | 11.2 | 42.92 | 38 | 14 | 4 | 15.87 | 69.9 |
| 1″ | 110 | 12.7 | 50.80 | 49 | 16 | 4 | 15.87 | 79.4 |
| 1 1/4″ | 115 | 14.3 | 63.50 | 59 | 19 | 4 | 15.87 | 88.9 |
| 1 1/2″ | 125 | 15.9 | 73.15 | 65 | 21 | 4 | 15.87 | 98.4 |
| 2″ | 150 | 17.5 | 91.94 | 78 | 24 | 4 | 19.05 | 120.7 |
| 2 1/2″ | 180 | 20.7 | 104.65 | 90 | 27 | 4 | 19.05 | 139.7 |
| 3″ | 190 | 22.3 | 127.00 | 108 | 29 | 4 | 19.05 | 152.4 |
| 3 1/2″ | 215 | 22.3 | 139.70 | 122 | 30 | 8 | 19.05 | 177.8 |
| 4″ | 230 | 22.3 | 157.22 | 135 | 32 | 8 | 19.05 | 190.5 |
| 5″ | 255 | 22.3 | 185.67 | 164 | 35 | 8 | 22.22 | 215.9 |
| 6″ | 280 | 23.9 | 215.90 | 192 | 38 | 8 | 22.22 | 241.3 |
| 8″ | 345 | 27.0 | 269.75 | 246 | 43 | 8 | 22.22 | 298.5 |
| 10″ | 405 | 28.6 | 323.85 | 305 | 48 | 12 | 25.40 | 362.0 |
| 12″ | 485 | 30.2 | 381.00 | 365 | 54 | 12 | 25.40 | 431.8 |
| 14″ | 535 | 33.4 | 412.75 | 400 | 56 | 12 | 28.57 | 476.3 |
| 16″ | 595 | 35.0 | 469.90 | 457 | 62 | 16 | 28.57 | 539.8 |
| 18″ | 635 | 38.1 | 533.40 | 505 | 67 | 16 | 31.75 | 577.9 |
| 20″ | 700 | 41.3 | 584.20 | 559 | 71 | 20 | 31.75 | 635.0 |
| 24″ | 815 | 46.1 | 692.15 | 663 | 81 | 20 | 34.92 | 749.3 |
The dimensions are in millimeters
ASME B16.5 Stainless Steel Threaded Flange is used to connect other threaded components in non-critical, low pressure applications. Reducing Threaded Flange widely used in various applicaions industry. ANSI B16.5 Cast Iron Threaded Flange is available in grades, various size, thickness & Specification as per the customer requirments. The ASME B16.5 Threaded Flange may be welded around the joint after assembly, but it is not considered a satisfactory method of increasing its applications.
Class 300 Threaded Flange Dimensions
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore Threaded Flanges | Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Dia.(A) | Height1(H) | Nbr | Holes | Dia.(C) |
| 1/2″ | 95 | 12.7 | 35.05 | 38 | 23.6 | 21 | 4 | 15.87 | 66.7 |
| 3/4″ | 115 | 14.3 | 42.92 | 48 | 29.0 | 24 | 4 | 19.05 | 82.6 |
| 1″ | 125 | 15.9 | 50.80 | 54 | 35.8 | 25 | 4 | 19.05 | 88.9 |
| 1 1/4″ | 135 | 17.5 | 63.50 | 64 | 44.4 | 25 | 4 | 19.05 | 98.4 |
| 1 1/2″ | 155 | 19.1 | 73.15 | 70 | 50.3 | 29 | 8 | 22.22 | 114.3 |
| 2″ | 165 | 20.7 | 91.94 | 84 | 63.5 | 32 | 8 | 19.05 | 127.0 |
| 2 1/2″ | 190 | 23.9 | 104.65 | 100 | 76.2 | 37 | 8 | 22.22 | 149.2 |
| 3″ | 210 | 27.0 | 127.00 | 117 | 92.2 | 41 | 8 | 22.22 | 168.3 |
| 3 1/2″ | 230 | 28.6 | 139.70 | 133 | 104.9 | 43 | 8 | 22.22 | 184.2 |
| 4″ | 255 | 30.2 | 157.22 | 146 | 117.6 | 46 | 8 | 22.22 | 200.0 |
| 5″ | 280 | 33.4 | 185.67 | 178 | 144.4 | 49 | 8 | 22.22 | 235.0 |
| 6″ | 320 | 35.0 | 215.90 | 206 | 171.4 | 51 | 12 | 22.22 | 269.9 |
| 8″ | 380 | 39.7 | 269.75 | 260 | 222.2 | 60 | 12 | 25.40 | 330.2 |
| 10″ | 445 | 46.1 | 323.85 | 321 | 276.2 | 65 | 16 | 28.57 | 387.4 |
| 12″ | 520 | 49.3 | 381.00 | 375 | 328.6 | 71 | 16 | 31.75 | 450.8 |
| 14″ | 585 | 52.4 | 412.75 | 425 | 360.4 | 75 | 20 | 31.75 | 514.4 |
| 16″ | 650 | 55.6 | 469.90 | 483 | 411.2 | 81 | 20 | 34.92 | 571.5 |
| 18″ | 710 | 58.8 | 533.40 | 533 | 462.0 | 87 | 24 | 34.92 | 628.6 |
| 20″ | 775 | 62.0 | 584.20 | 587 | 512.8 | 94 | 24 | 34.92 | 685.8 |
| 24″ | 915 | 68.3 | 692.15 | 702 | 614.4 | 105 | 24 | 41.27 | 812.8 |
The dimensions are in millimeters
Stainless Steel Threaded Flange 600#
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore Threaded Flanges | Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Dia.(A) | Height1(H) | Nbr | Holes | Dia.(C) |
| 1/2″ | 95 | 14.3 | 35.05 | 38 | 23.6 | 22 | 4 | 15.87 | 66.7 |
| 3/4″ | 115 | 15.9 | 42.92 | 48 | 29.0 | 25 | 4 | 19.05 | 82.6 |
| 1″ | 125 | 17.5 | 50.80 | 54 | 35.8 | 27 | 4 | 19.05 | 88.9 |
| 1 1/4″ | 135 | 20.7 | 63.50 | 64 | 44.4 | 29 | 4 | 19.05 | 98.4 |
| 1 1/2″ | 155 | 22.3 | 73.15 | 70 | 50.6 | 32 | 4 | 22.22 | 114.3 |
| 2″ | 165 | 25.4 | 91.94 | 84 | 63.5 | 37 | 8 | 19.05 | 127.0 |
| 2 1/2″ | 190 | 28.6 | 104.65 | 100 | 76.2 | 41 | 8 | 22.22 | 149.2 |
| 3″ | 210 | 31.8 | 127.00 | 117 | 92.2 | 46 | 8 | 22.22 | 168.3 |
| 3 1/2″ | 230 | 35.0 | 139.70 | 133 | 104.9 | 49 | 8 | 25.40 | 184.2 |
| 4″ | 275 | 38.1 | 157.22 | 152 | 117.6 | 54 | 8 | 25.40 | 215.9 |
| 5″ | 330 | 44.5 | 185.67 | 189 | 144.4 | 60 | 8 | 28.57 | 266.7 |
| 6″ | 355 | 47.7 | 215.90 | 222 | 171.4 | 67 | 12 | 31.75 | 292.1 |
| 8″ | 420 | 55.6 | 269.75 | 273 | 222.2 | 76 | 12 | 31.75 | 349.2 |
| 10″ | 510 | 63.5 | 323.85 | 343 | 276.2 | 86 | 16 | 34.92 | 431.8 |
| 12″ | 560 | 66.7 | 381.00 | 400 | 328.6 | 92 | 20 | 34.92 | 489.0 |
| 14″ | 605 | 69.9 | 412.75 | 432 | 360.4 | 94 | 20 | 38.10 | 527.0 |
| 16″ | 685 | 76.2 | 469.90 | 495 | 411.2 | 106 | 20 | 41.27 | 603.2 |
| 18″ | 745 | 82.6 | 533.40 | 546 | 462.0 | 117 | 20 | 44.45 | 654.0 |
| 20″ | 815 | 88.9 | 584.20 | 610 | 512.8 | 127 | 24 | 44.45 | 723.9 |
| 24″ | 940 | 101.6 | 692.15 | 718 | 614.4 | 140 | 24 | 47.62 | 838.2 |
Threaded Floor Flange Dimensions
NPS 1/2 Threaded Flange Dimensions
| CL | 150 | 300 | 600 | 900 | 1500 | 2500 |
| DIA A |
30 | 38 | 38 | 38 | 38 | 43 |
| DIA D |
90 | 95 | 95 | 120 | 120 | 135 |
| THK B |
9.6 | 12.7 | 14.3 | 22.3 | 22.3 | 30.2 |
| 11.2 | 14.3 | 20.7 | 28.7 | 28.7 | 36.6 | |
| DIA G |
35.1 | 35.1 | 35.1 | 35.1 | 35.1 | 35.1 |
| DIA K |
60.3 | 66.7 | 66.7 | 82.6 | 82.6 | 88.9 |
| H | 14 | 21 | 22 | 32 | 32 | 40 |
| 15.6 | 22.6 | 28.4 | 38.4 | 38.4 | 46.4 | |
| NO. L |
4 | 4 | 4 | 4 | 4 | 4 |
| DIA L |
15.9 | 15.9 | 15.9 | 22.2 | 22.2 | 22.2 |
| Stud Bolts Diameter x Length | ||||||
| DIA (in) |
1/2 | 1/2 | 1/2 | 3/4 | 3/4 | 3/4 |
| Len mm |
55 | 65 | 75 | 110 | 110 | 120 |
NPS 3/4 Threaded Flange Dimensions
| CLASS | 150 | 300 | 600 | 900 | 1500 | 2500 |
| DIA A |
38 | 48 | 48 | 44 | 44 | 51 |
| DIA D |
100 | 115 | 115 | 130 | 130 | 140 |
| THK B |
11.2 | 14.3 | 15.9 | 25.4 | 25.4 | 31.8 |
| 12.8 | 15.9 | 22.3 | 31.8 | 31.8 | 38.2 | |
| DIA G |
42.9 | 42.9 | 42.9 | 42.9 | 42.9 | 42.9 |
| DIA K |
69.9 | 82.6 | 82.6 | 88.9 | 88.9 | 95.2 |
| H | 14 | 24 | 25 | 35 | 35 | 43 |
| 15.6 | 25.6 | 31.4 | 41.4 | 41.4 | 49.4 | |
| NO. L |
4 | 4 | 4 | 4 | 4 | 4 |
| DIA L |
15.9 | 19.1 | 19.1 | 22.2 | 22.2 | 22.2 |
| Stud Bolts Diameter x Length | ||||||
| DIA (in) |
1/2 | 5/8 | 5/8 | 3/4 | 3/4 | 3/4 |
| Len mm |
65 | 75 | 90 | 115 | 115 | 125 |
NPS 3/4 Threaded Flange Dimension
| CLASS | 150 | 300 | 600 | 900 | 1500 | 2500 |
| DIA A |
38 | 48 | 48 | 44 | 44 | 51 |
| DIA D |
100 | 115 | 115 | 130 | 130 | 140 |
| THK B |
11.2 | 14.3 | 15.9 | 25.4 | 25.4 | 31.8 |
| 12.8 | 15.9 | 22.3 | 31.8 | 31.8 | 38.2 | |
| DIA G |
42.9 | 42.9 | 42.9 | 42.9 | 42.9 | 42.9 |
| DIA K |
69.9 | 82.6 | 82.6 | 88.9 | 88.9 | 95.2 |
| H | 14 | 24 | 25 | 35 | 35 | 43 |
| 15.6 | 25.6 | 31.4 | 41.4 | 41.4 | 49.4 | |
| NO. L |
4 | 4 | 4 | 4 | 4 | 4 |
| DIA L |
15.9 | 19.1 | 19.1 | 22.2 | 22.2 | 22.2 |
| Stud Bolts Diameter x Length | ||||||
| DIA (in) |
1/2 | 5/8 | 5/8 | 3/4 | 3/4 | 3/4 |
| Len mm |
65 | 75 | 90 | 115 | 115 | 125 |
NPS 1 Threaded Flange Dimensions
| CLASS | 150 | 300 | 600 | 900 | 1500 | 2500 |
| DIA A |
49.2 | 54 | 54 | 52 | 52 | 57 |
| DIA D |
110 | 125 | 125 | 150 | 150 | 160 |
| THK B |
12.7 | 15.9 | 17.5 | 28.6 | 28.6 | 35 |
| 14.3 | 17.5 | 23.9 | 35 | 35 | 41.4 | |
| DIA G |
50.8 | 50.8 | 50.8 | 50.8 | 50.8 | 50.8 |
| DIA K |
79.4 | 88.9 | 88.9 | 101.6 | 101.6 | 108 |
| H | 16 | 25 | 27 | 41 | 41 | 48 |
| 17.6 | 26.6 | 33.4 | 47.4 | 47.4 | 54.4 | |
| NO. L |
4 | 4 | 4 | 4 | 4 | 4 |
| DIA L |
15.9 | 19.1 | 19.1 | 25.4 | 25.4 | 25.4 |
| Stud Bolts Diameter x Length | ||||||
| DIA (in) |
1/2 | 5/8 | 5/8 | 7/8 | 7/8 | 7/8 |
| Len mm |
65 | 75 | 90 | 125 | 125 | 140 |
NPS 1.1/4 Threaded Flange Dimensions
| CLASS | 150 | 300 | 600 | 900 | 1500 | 2500 |
| DIA A |
59 | 64 | 64 | 64 | 64 | 73 |
| DIA D |
115 | 135 | 135 | 160 | 160 | 185 |
| THK B |
14.3 | 17.5 | 20.7 | 28.6 | 28.6 | 38.1 |
| 15.9 | 19.1 | 27.1 | 35 | 35 | 44.5 | |
| DIA G |
63.5 | 63.5 | 63.5 | 63.5 | 63.5 | 63.5 |
| DIA K |
88.9 | 98.4 | 98.4 | 111.1 | 111.1 | 130.2 |
| H | 19 | 25 | 29 | 41 | 41 | 52 |
| 20.6 | 26.6 | 35.4 | 47.4 | 47.4 | 58.4 | |
| NO. L |
4 | 4 | 4 | 4 | 4 | 4 |
| DIA L |
15.9 | 19.1 | 19.1 | 25.4 | 25.4 | 28.6 |
| Stud Bolts Diameter x Length | ||||||
| DIA (in) |
1/2 | 5/8 | 5/8 | 7/8 | 7/8 | 1 |
| Len mm |
70 | 85 | 95 | 125 | 125 | 150 |
NPS 1.1/2 Threaded Flange Dimensions
| CLASS | 150 | 300 | 600 | 900 | 1500 | 2500 |
| DIA A |
65 | 70 | 70 | 70 | 70 | 79 |
| DIA D |
125 | 155 | 155 | 180 | 180 | 205 |
| THK B |
15.9 | 19.1 | 22.3 | 31.8 | 31.8 | 44.5 |
| 17.5 | 20.7 | 28.7 | 38.2 | 38.2 | 50.9 | |
| DIA G |
73.2 | 73.2 | 73.2 | 73.2 | 73.2 | 73.2 |
| DIA K |
98.4 | 114.3 | 114.3 | 123.8 | 123.8 | 146 |
| H | 21 | 29 | 32 | 44 | 44 | 60 |
| 22.6 | 31.6 | 38.4 | 50.4 | 50.4 | 66.4 | |
| NO. L |
4 | 4 | 4 | 4 | 4 | 4 |
| DIA L |
15.9 | 22.2 | 22.2 | 28.6 | 28.6 | 31.8 |
| Stud Bolts Diameter x Length | ||||||
| DIA (in) |
1/2 | 3/4 | 3/4 | 1 | 1 | 1.1/8 |
| Len mm |
70 | 90 | 110 | 140 | 140 | 170 |
Notes:
- Dimensions are in millimeters unless otherwise indicated.
- The length of the Stud Bolt does not include the height of the chamfers (points).
Typical Stainless Steel 18/8 Grade Designations
| ASTM | BS | DIN | EURONORM |
|---|---|---|---|
| 304 | 304S15 | X5 Cr Ni 18 10 | 1.4301 |
| 304L | 304S11 | X2 Cr Ni 18 9 | 1.4307 |
| 316 | 316S31 | X5 Cr Ni Mo 17 12 2 | 1.4401 |
| 316L | 316S11 | X2 Cr Ni Mo 17 13 2 | 1.4404 |
| 321 | 321S31 | X6 Cr Ni 18 10 | 1.4541 |
| 316Ti | 320S31 | X6 Cr Ni Mo Ti 17 12 2 | 1.4571 |
| SMO | 254SMO | X1 Cr Ni Mo Cu N 20 18 7 | 1.4547 |
America Series: Class 150, Class 300, Class 600, Class 900A, Class 1500, Class 2500.
Europe Series: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400.
| ASME B16.5 Threaded Flange Material | Carbon steel | ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH |
| P250GH, P280GHM 16MN, 20MN ,20# | ||
| Stainless steel | ASTM A182, F304/304L, F316/316L | |
| Alloy steel | ASTM A182 F12, F11, F22, F5, F9, F91 etc. | |
| Threaded Flange Standard | ANSI | Class 150 Flanges-Class 2500 Flanges |
| DIN | 6Bar 10Bar 16Bar 25Bar 40Bar | |
| JIS | 5K Flanges-20K Flanges | |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar | |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
ANSI B16.5 Threaded Flange Standard Manufacturing Materials
| Dimensions | Base Material | Pressure Rating |
|---|---|---|
| ASME B16.5 | ASTM A182 (Forgings) ASTM A240 (Plate) | 150#. 300#. 400#. 600#. 900#. 1500#. 2500#. |
| API 605 | ASTM A182 (Forgings) ASTM A240 (Plate) | 150#. 300#. 400#. 600#. 900#. 1500#. 2500#. |
| ASME B16.47series A & B | ASTM A182 (Forgings) ASTM A240 (Plate) | 150#. 300#. 400#. 600#. 900#. 1500#. 2500#. |
| EN1092-1 | ASTM A182 (Forgings) | PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160. PN250. PN320. PN400. |
| BS4504 | BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) | PN2.5. PN6. PN10. PN16. PN25. PN40. PN63. PN100. PN160. |
| BS10 | BS970 (Bar)ASTM A240 (Plate) ASTM A182 (Forgings) |
ASME B16.5 Threaded Flange Pressure Ratings
Maximum allowable non-shock pressure (psig) and temperature ratings for threaded flange ansi b16.5 and flanged fittings according the American National Standard ANSI B16.5 – 1988.
| Maximum Allowable non-shock Pressure (psig) | |||||||
|---|---|---|---|---|---|---|---|
| Temperature (oF) |
Pressure Class (lb) | ||||||
| 150 | 300 | 400 | 600 | 900 | 1500 | 2500 | |
| Hydrostatic Test Pressure (psig) | |||||||
| 450 | 1125 | 1500 | 2225 | 3350 | 5575 | 9275 | |
| -20 to 100 | 290 | 750 | 1000 | 1500 | 2250 | 3750 | 6250 |
| 200 | 260 | 750 | 1000 | 1500 | 2250 | 3750 | 6250 |
| 300 | 230 | 730 | 970 | 1455 | 2185 | 3640 | 6070 |
| 400 | 200 | 705 | 940 | 1405 | 2110 | 3520 | 5865 |
| 500 | 170 | 665 | 885 | 1330 | 1995 | 3325 | 5540 |
| 600 | 140 | 605 | 805 | 1210 | 1815 | 3025 | 5040 |
| 650 | 125 | 590 | 785 | 1175 | 1765 | 2940 | 4905 |
| 700 | 110 | 555 | 740 | 1110 | 1665 | 2775 | 4630 |
| 750 | 95 | 505 | 675 | 1015 | 1520 | 2535 | 4230 |
| 800 | 80 | 410 | 550 | 825 | 1235 | 2055 | 3430 |
| 850 | 65 | 320 | 425 | 640 | 955 | 1595 | 2655 |
| 900 | 50 | 225 | 295 | 445 | 670 | 1115 | 1855 |
| 950 | 35 | 135 | 185 | 275 | 410 | 685 | 1145 |
| 1000 | 20 | 85 | 115 | 170 | 255 | 430 | 715 |
Dimensional Tolerances of Stainless Steel Screwed Flanges
| Outside Diameter ≤ 24 = 1.6 mm | > 24 = ± 3.2 mm |
Inside Diameter Within Limits on Boring Gauge |
|---|---|
| Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm 6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm |
Drilling Bolt Circle = 1.6 mm | Bolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle with Respect to Facing ≤ 2½ = 0.8 mm max. | ≥ 3 = 1.6 mm max. |
| Outside Diameter of Hub ≤ 12 = + 2.4 mm / - 1.6 mm | ≥ 14 = ± 3.2 mm |
Diameter of Counterbore Same as forInside Diameter |
| Thickness ≤ 18 = + 3.2 mm / - 0 | ≥ 20 = + 4.8 mm / - 0 |
Length thru Hub ≤ 18 = + 3.2 mm / - 0.8 mm | ≥ 20 = + 4.8 mm / - 1.6 mm |
Check ASME B16.5 Threaded Flange Pressure Ratings, Long Established Suppliers Of schedule 10 Brass Threaded Flange, Cast Iron Threaded Flange Order Custom Sizes Online, Check Availability ASME B16.5 Class 600 Aluminum Pipe Flange Threaded, Get free quote- ASTM A182 F316 Copper Threaded Flange for Raised Face connection, ASME B16.47 Series b Black Pipe Threaded Flange Best Price & Fast Delivery, Manufacturer Of ANSI / ASME B16.5 Stainless Steel Threaded Flange In India.
Get In Touch For Assistance DN15~DN150 Ductile Iron Threaded Flange, Own Stockyard Of AWWA C207 Npt Threaded Flange, Best Deal Buy ASME B16.5 Threaded Flange From Manufacturers In India, 18 inch 1500# lat Face Threaded Flange Price List, Largest Independent ASME B16.5 Stainless Steel Threaded Flange Stockist, Looking To Buy Din 2566 Small Threaded Flange? Contact MD Exports LLP, A Reliable ASTM A694 F60 Square Threaded Flange Supplier.
We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery. MD Exports LLP is a Govt. approved certified ASME B16.5 Stainless Steel Threaded Flange in India in India. All of our Copper Threaded Flange are manufactured and tested to international standards, and specifications as per JIS, EN, DIN, ASTM etc. We are well-known as a trusted vendor as a Ductile Iron Threaded Flange manufactuers & Flat Face Threaded Flange distributor in your country.