ASME B16.9 Stainless Steel Stub End

ASME B16.9 Long Stub End Manufacturer, Suppliers Of MSS SP 75 Carbon Steel Short Stub End in India

ASME B16.9 Stub End manufacturer & supplier of Buttweld schedule 80 Type C Stub End Pipe Fitting accept small/ large quantities With Low Price, Check 24 inch Stub End Dimensions In MM And Weight Chart In KG.

ASME B16.9 Stainless Steel Stub End Dimensions differ with the fittings they go with. Stub ends are high quality, thermally stable, highly strong in mechanical strength and have long service life. There are different material made stubs but the Carbon Steel Stub End Fittings are most common. The Stub End Weight differs mostly due to the material make and the types. The Stub End Type A is applied with standard lap joint flange. There are different specifications and classes such as Stub End Mss Sp 43.

ANSI B16.9 Stainless Steel Stub End

ASME B16.9 Long Stub End

Carbon Steel Stub End

What Is Stub Ends?
Carbon Steel Stub End Price List
Specification Of Stainless Steel Stub Ends
ASME B16.9 Stub End Fittings Material
Types Of ASME B16.9 Stub End

Carbon Steel Stub End Dimensions
MSS Sp 43 Stub End Dimensions
Stainless Steel Lap Joint Stub End Dimensions
ASME B16.9 Long Neck Stub End Dimensions
Short Pattern Stub End Dimensions
ASME B16.9 Stub End Weight Chart
End welding bevels of Stub End Fittings
ASME B16.9 Short Stub Ends Length
Dimensional Tolerances of Stub End Buttweld Fittings

Check latest ASME B16.9 Seamless Carbon Steel Stub End & Schedule 80 ANSI B16.9 stub end fittings Price List India Mumbai. Looking for the high temperature ASME B16.9 Stub End Buttweld Fittings manufacturer in India? Buy from MD Exports LLP - A leading MSS Type B Stub End manufacturers in Mumbai.

The ASME B16.9 Stainless Steel Stub End Manufacturers produce type A and type B Stainless Steel Stub End Pipe Fittings. Depending on the length of the stub part of the fitting, it is divided into two categories; the Long Stub End and the Short Stub End. These serve different purposes in pipe fitting. A Lap Joint Stub End is used as a replacement to welded flanges when the rotation needs back up with another flange. The different material makes, the different Type B Stub End Dimensions and the different applications can make the different entries in a Stub End Weight Chart. In the two types, the Stub End Type A is most common. The standards vary such as the Stub End B16.9 which goes with pipes less than 48 inches in diameter.

What Is Stub Ends?

Stub End Buttweld Fittings differ in type such as the Mss Type B Stub End; material makes such as the Stub End Carbon Steel and the Stub End 304 or the Stub End Stainless Steel. Also the Stub End Specification differs such as the Stub End Din 2642 or the Stub End EN 1092-1 Type 35 and the Stub End EN 1092-1 Type 36. As in any other pipe fitting, the pressure classes differ as well. There are Stub End Jis 10k, the Stub End Sch 10 and the EN 1092-1 Stub End which all have different properties. The ASME B 16.9 Stub End can be manufactured in many different materials yet the Ss Stub End Dimensions make stainless steel to be the most preferred choice. ANSI B 16.9 Stub End is used in low to medium level piping ranging from ½ inch to 48 inches.

Carbon Steel Stub End Price List

SR NO	Piping Material	Material Name	Description	Price Par Pice (USD$)
4	STUB ENDS	LAP JOINT STUB ENDS	Stub EndS, SR, BW, ANSI/ ASME B16.9, Stainless Steel, ASTM F304	$6/78
5	STUB ENDS	STUB ENDS FITTINGS	Stub EndS, SR, BW, ANSI/ ASME B16.9, Stainless Steel, ASTM F316	$4.60
1	STUB ENDS	LAP JOINT STUB ENDS	Stub EndS, SR, BW, ANSI/ ASME B16.9, Carbon Steel, ASTM A 234 Gr.WPB	$3.97
2	STUBS ENDS	LONG SHORT STUBS ENDS	StubS EndS, LR, BW, Carbon Steel, ANSI/ ASME B16.9, ASTM A 234 Gr.WPB	$3
3	STUB ENDS	LONG SHORT STUB ENDS	Stub EndS, SR, BW, Carbon Steel, ANSI/ ASME B16.9, ASTM A 234 Gr.WPB	$4.7

Please note this is an approx Price of mss type a stub end In India. For final carbon steel stub end Price List Please Call on + or drop an Email to [email protected]

Specification Of Stainless Steel Stub Ends

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175
Specifications	ASME B16.9 Stub End
Stype c stub end Types	Seamless / ERW / Welded / Fabricated Pipe Fittings
stub end en 1092	Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
stainless steel stub ends size	Seamless Butt Weld Fittings: 1/2" - 10" Welded Butt Weld Fittings: 1/2" - 48"
ASME B16.9 Stub End Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Origin & Mills for Stub End Type A	Stubs End Mss Sp 43 for Japanese, Long Stubs End for Indian, Short Stubs End for USA, Lap Joint Stubs End for Korean, Stubs End B16.9 for European, Stubs End Buttweld Fittings for Ukraine, Stubs End Din 2642 for Russian
Key markets and industries for Stub End EN 1092-1 Type 35	Bitumen upgraders. Petrochemicals and acids. Heavy oil refineries. Nuclear power (mostly seamless).
ss stub end Type	DN15-DN1200
Connection For mss type a stub end	Welding
stub end fittings Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Manufacturing process for stub end schedule 40	Push, Press, Forge, Cast, etc.
long stub end Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
stub end pipe fitting Size Range	½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
stub end fittingsDimensions	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Stub End Sch 10 Application	Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc ASME B16.9 Stub End Schedule 40 are an economical alternative for lower-pressure applications. ANSI B16.9 Stub End Sch 10 have a thicker wall for higher-pressure applications.

ASME B16.9 Stub End Fittings Material

carbon steel stub end	ASTM A105 Stub Ends Type A ASME SA105 Stub Ends Mss Sp 43 DIN 1.0402 Long Stub Ends DIN 1.0460 Short Stub Ends DIN 1.0619 Lap Joint Stub Ends ASTM A105N Stub Ends Type A ASME SA105N Stub Ends B16.9p ASTM A350 LF2 Stub Ends Buttweld Fittings ASME SA350 Pipe Cap Fittings High Yield CS ASTM A694 Stub Ends Din 2642
Other ASME B16.9 Stub End material	Tin bronze, Alumunum bronze, Lead bronze
Titanium Stub End Sch 10	ASTM B381 Titanium Gr. 1 ASTM B381 Titanium Gr. 2 ASTM B381 Titanium Gr. 4 ASTM B381 Titanium Gr. 5 ASTM B381 Titanium Gr. 7
stainless steel stub ends	ASTM A182 F304 Stub Ends EN 1092-1 Type 35 ASTM A182 F304L EN 1092-1 Type 36 ASTM A182 F316 Stub Ends Jis 10k ASTM A182 F316L Stub Ends Sch 10 ASTM A182 F317 EN 1092-1 Stub Ends ASTM A182 F317L Stub Ends 304 ASTM A182 F321 Stub Ends Type A ASTM A182 F321H Stub Ends Mss Sp 43 ASTM A182 F347 Long Stub Ends ASTM A182 F347H Short Stub Ends
Super Duplex Mss Type B Stub End	S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Stub End Din 2642	Incoloy 800, Incoloy 800H, Incoloy 800HT (UNS N08800), Incoloy 825 (UNS N08825)
254 Smo Stub Ends EN 1092-1 Type 35	SMO 254/6Mo, UNS S31254, DIN 1.4547
Nimonic Stub Ends EN 1092-1 Type 36	Nimonic 75, Nimonic 80A, Nimonic 90
Alloy Steel Lap Joint Stub End	ASTM A182 F5 Stub Ends Type A ASTM A182 F9 Stub Ends B16.9 ASTM A182 F11 Stub Ends Buttweld Fittings ASTM A182 F22 Mss Type B Stub Ends ASTM A182 F91 Stub Ends Din 264
Alloy 20 Lap Joint Stub Ends	Carpenter® 20 Alloy, Alloy 20Cb-3
Aluminium Stub End Type A	5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel Stub End B16.9	Nickel 200, Nickel 201
Inconel Stub Ends EN 1092-1 Type 35	Inconel 600 Stubs Ends EN 1092-1 Type 36 Inconel 601 Stubs Ends Jis 10k Inconel 625 Stubs Ends Sch 10 Inconel 718 EN 1092-1 Stubs Ends Inconel x750 Stub Ends 304
Copper Stub End Type A	T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Stub Ends Mss Sp 43	Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Brass Long Stub Ends	3602 / 2604 / H59 / H62 / etc.
Hastelloy Cap Bw Sch 80	Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3
Monel Short Stub Ends	Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) Pipe End Cap
Duplex Stub End Buttweld Fittings	S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61

MD Exports LLP is a manufacturer and supplier of Stainless Steel Stubs Ends Pipe Fitting & Check Type B Stub End Dimensions, offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

Types Of ASME B16.9 Stub End

1/2 in. Schedule 40 316L Stainless Steel Stub End

1 in. Schedule 10 304L Stainless Steel Type A Stub End

1/2 in. Stub End Schedule 40 304L Stainless Steel Type A MSS

3/4 in. Schedule 40 304L Stainless Steel Stub End

1 in. Weld Extra Heavy ASA and Carbon Steel Stub End

1 in. Weld Schedule 160 Carbon Steel Stub End

2-1/2 in. Straight Standard Carbon Steel Weld ASA Stub End

16 in. Weld Standard ASA and Carbon Steel Stub End

2 in. Butt Weld 316L Stainless Steel Stub End

16 in. Schedule 10 Type A 304L Stainless Steel Stub End

1/2 in. Schedule 10 Seamless 304L Stainless Steel Stub End

1-1/2 in. Schedule 10 Type C 304L Stainless Steel Stub End

5 in. Standard ASA and Carbon Steel Weld Stub End

2 in. Extra Heavy Carbon Steel Weld Stub End

3 Carbon Steel Standard ASA STUB End A

10 in. Straight Standard Carbon Steel Weld Stub End

MD Exports LLP is an ISO certified ASME B16.9 Stainless Steel Stub End Manufacturers And MSS SP 75 Carbon Steel Short Stub End distributor in India

Carbon Steel Stub End Dimensions

Nominal Pipe Size	Outside diameter of barrel		Length (F)		Radius (R)	Diameter (G)
Nominal Pipe Size	Minimum	Maximum	Long Pattern	Short Pattern	Radius (R)	Diameter (G)
1/2″	20.5	22.8	76	51	3	35
3/4″	25.9	28.1	76	51	3	43
1″	32.6	35.0	102	51	3	51
1 1/4″	41.4	43.6	102	51	5	64
1 1/2″	47.5	49.9	102	51	6	74
2″	59.5	62.4	152	64	8	92
2 1/2″	72.2	75.3	152	64	8	105
3″	88.1	91.3	152	64	10	127
3 1/2″	100.8	104.0	152	76	10	140
4″	113.5	116.7	152	76	11	157
5″	140.5	144.3	203	76	11	186
6″	167.5	171.3	203	89	13	216
8″	218.3	222.1	203	102	13	270
10″	272.3	277.2	254	127	13	324
12″	323.1	328.0	254	152	13	381
14″	354.8	359.9	305	152	13	413
16″	405.6	411.0	305	152	13	470
18″	456.0	462.0	305	152	13	533
20″	507.0	514.0	305	152	13	584
22″	558.0	565.0	305	152	13	641
24″	609.0	616.0	305	152	13	692

MSS Sp 43 Stub End Dimensions

STUB ENDS – ANSI B 16.9 and MSS SP-43 dimension
inches	ND	mm	Diameter of lap	Radius of fillet		Length F
D			G	R	R1	MSS SP43	ANSI B16.9
1/2	15	21,34	34,92	3,17	0,80	50,80	76,20
3/4	20	26,67	42,86	3,17	0,80	50,80	76,20
1	25	33,40	50,80	3,17	0,80	50,80	101,60
1 1/4	32	42,16	63,50	4,76	0,80	50,80	101,60
1 1/2	40	48,26	73,00	6,35	0,80	50,80	101,60
2	50	60,32	92,10	7,93	0,80	63,50	152,40
2 1/2	65	73,02	104,80	7,93	0,80	63,50	152,40
3	80	88,90	127,00	9,52	0,80	63,50	152,40
3 1/2	90	101,60	139,70	9,52	0,80	76,20	152,40
4	100	114,30	157,20	11,11	0,80	76,20	152,40
5	125	141,30	185,70	11,11	1,58	76,20	203,20
6	150	168,27	215,90	12,70	1,58	88,90	203,20
8	200	219,07	269,80	12,70	1,58	101,60	203,20
10	250	273,05	323,80	12,70	1,58	127,00	254,00
12	300	323,85	381,00	12,70	1,58	152,40	254,00
14	350	355,60	412,70	12,70	1,58	152,40	304,80
16	400	406,40	469,90	12,70	1,58	152,40	304,80
18	450	457,20	533,40	12,70	1,58	152,40	304,80
20	500	508,00	584,20	12,70	1,58	152,40	304,80
22	550	558,80	641,30	12,70	1,58	152,40	304,80
24	600	609,60	692,10	12,70	1,58	152,40	304,80
The lap thickness T shall not be less than nominal pipe wall thickness t

MD Exports LLP is one of the largest manufacturer & supplier of ASME B16.9 Stainless Steel Stub End, Buttweld schedule 80 Type C Stub End Pipe Fitting, ASME B16.9 Seamless Carbon Steel Stub End, Schedule 80 ANSI B16.9 stub end fittings, ASME B16.9 Stub End Buttweld Fittings & Duplex Steel MSS Type B Stub End in Qatar, Seamless Stub End Mss Sp 43 for Jubail - Saudi Arabia, Melbourne, Brisbane, Perth, Australia, Stubs Ends Din 2642 for Saudi Arabia, Oman, Dubai (UAE), Long Stubs Ends for Taiwan, USA, Short Stubs Ends for Malaysia, Lap Joint Stubs Ends for, Deira, Europe, Egypt, Gauteng - South Africa,Nigeria, Pretoria - South Africa, Stubs Ends Type A for Russia, Romania, UAE, Kuwait, Spain, Salem -Tamil Nadu, Turkey, Sharjah - UAE, Singapore, UK, Cebu - Philippines.

Stainless Steel Lap Joint Stub End Dimensions

Nominal Pipe Size (NPS)	Outside Diameter at Bevel		Long Pattern	Short Pattern	Radius of Fillet	Diameter of Lap
Nominal Pipe Size (NPS)	Max	Min	F	F	R	G
1/2	22.8	20.5	76	51	3	35
3/4	28.1	25.9	76	51	3	43
1	35.0	32.6	102	51	3	51
1-1/4	43.6	41.4	102	51	5	64
1-1/2	49.9	47.5	102	51	6	73
2	62.4	59.5	152	64	8	92
2-1/2	75.3	72.2	152	64	8	105
3	91.3	88.1	152	64	10	127
3-1/2	104.0	100.8	152	76	10	140
4	116.7	113.5	152	76	11	157
5	144.3	140.5	203	76	11	186
6	171.3	167.5	203	89	13	216
8	222.1	218.3	203	102	13	270
10	277.2	272.3	254	127	13	324
12	328.0	323.1	254	152	13	381
14	359.5	354.8	305	152	13	413
16	411.0	405.6	305	152	13	470
18	462	456	305	152	13	533
20	514	507	305	152	13	584
22	565	558	305	152	13	641
24	616	609	305	152	13	692

A Carbon Steel Stub End Fittings and a lap joint flange can be used together as an alternative way to make a flanged connection as opposed to welding neck flanges. The two devices that are to be combined, in this case, are:

ASME B16.9 Long Neck Stub End Dimensions

Product	Nom. Pipe Size	Dia (G)	Length (F), Short	Outside Dia (O.D.)	Sch 160, Inside Dia (I.D.)	Sch 160, Lap Thickness (t)	Schedule 160, Wall Thickness (T)	XX Strong Wall Approx. Weight	XX Strong Wall, Inside Dia (I.D.)
1 1/2″ Stubs Ends Long Type “A	1.5	2.875	2	1.9	1.338	0.281	0.281	2.98	1.1
1 1/2″ Stubs Ends Long Type “A”	1.5	2.875	4	1.9	0.15	0.15	1.49	1.5	0.2
1 1/4″ Stubs Ends Long Type “A	1.25	2.5	2	1.66	1.16	0.25	0.25	2.52	0.896
1 1/4″ Stubs Ends Long Types “A”	1.25	2.5	4	1.66	0.14	0.14	1.26	1.278	0.191
1″ Stubs Ends Long Types “A	1	2	2	1.315	0.815	0.25	0.25	1.76	0.599
1″ Stubs Ends Long Types “A”	1	2	4	1.315	0.133	0.133	0.88	0.957	0.179
1/2″ Stubs Ends Long Types “A	0.5	1.375	2	0.84	0.464	0.187	0.188	0.68	0.252
1/2″ Stubs Ends Long Types “A”	0.5	1.375	3	0.84	0.109	0.109	0.34	0.546	0.147
10″ Stubs Ends Long Types “A	10	12.75	5	10.75	8.5	1.125	1.125	–	–
10″ Stubs Ends Long Types “A”	10	12.75	10	10.75	0.365	0.365	54	9.75	0.5
12″ Stubs Ends Long Types “A	12	15	6	12.75	10.126	1.312	1.312	–	–
12″ Stubs Ends Long Types “A”	12	15	10	12.75	0.375	0.375	64.5	11.75	0.5
14″ Stubs Ends Long Types “A”	14	16.25	12	14	0.375	0.375	84	13	0.5
16″ Stubs Ends Long Types “A”	16	18.5	12	16	0.375	0.375	98	15	0.5
18″ Stubs Ends Long Types “A”	18	21	12	18	0.375	0.375	136	17	0.5
2 1/2″ Stubs Ends Long Types “A	2.5	4.125	2.5	2.875	2.125	0.375	0.375	8.8	1.771
2 1/2″ Stubs Ends Long Types “A”	2.5	4.125	6	2.875	0.203	0.203	4.4	2.323	0.276
2″ Stubs Ends Long Types “A	2	3.625	2.5	2.375	1.689	0.343	0.343	6.1	1.503
2″ Stubs Ends Long Types “A”	2	3.625	6	2.375	0.154	0.154	3.05	1.939	0.218
20″ Stubs Ends Long Types “A”	20	23	12	20	0.375	0.375	157	19	0.5
3 1/2″ Stubs Ends Long Types “A	3.5	5.5	3	4	–	–	–	15.5	2.728
3 1/2″ Stubs Ends Long Types “A”	3.5	5.5	6	4	0.226	0.226	7.75	3.364	0.318
3″ Stubs Ends Long Types “A	3	5	2.5	3.5	2.624	0.438	0.438	9.8	2.3
3″ Stubs Ends Long Types “A”	3	5	6	3.5	0.216	0.216	6.5	2.9	0.3
3/4″ Stubs Ends Long Types “A	0.75	1.688	2	1.05	0.612	0.218	0.219	0.94	0.434
3/4″ Stubs Ends Long Types “A”	0.75	1.688	3	1.05	0.113	0.113	0.47	0.742	0.154
4″ Stubs Ends Long Types “A	4	6.188	3	4.5	3.438	0.531	0.531	19.3	3.152
4″ Stubs Ends Long Types “A”	4	6.188	6	4.5	0.237	0.237	9.65	3.826	0.337
5″ Stubs Ends Long Types “A	5	7.313	3	5.563	4.313	0.625	0.625	32.66	4.063
5″ Stubs Ends Long Types “A”	5	7.313	8	5.563	0.258	0.258	16.33	4.813	0.375
6″ Stubs Ends Long Types “A	6	8.5	3.5	6.625	5.187	0.718	0.719	45.26	4.897
6″ Stubs Ends Long Types “A”	6	8.5	8	6.625	0.28	0.28	22.63	5.761	0.432
8″ Stubs Ends Long Types “A	8	10.625	4	8.625	6.813	0.906	0.906	59.71	6.875
8″ Stubs Ends Long Types “A”	8	10.625	8	8.625	0.322	0.322	34.12	7.625	0.5

Short Pattern Stub End Dimensions

Product	Nom. Pipe Size	Diameter (G)	Length (J)	Outside Diameter (O.D.)	Schedule 5S Approx. Weight	Schedule 5S, Inside Diameter (I.D.)	Schedule 5S, Wall Thickness (T)
1 1/2″ Short Stubs Ends Short Type “C”	1.5	2.875	2	1.9	0.29	1.77	0.065
1 1/4″ Short Stubs Ends Short Type “C”	1.25	2.5	2	1.66	0.21	1.53	0.065
1″ Short Stubs Ends Short Type “C”	1	2	2	1.315	0.19	1.185	0.065
1/2″ Short Stubs Ends Short Type “C”	0.5	1.375	2	0.84	0.13	0.71	0.065
10″ Short Stubs Ends Short Type “C”	10	12.75	5	10.75	7.48	10.482	0.134
12″ Short Stubs Ends Short Type “C”	12	15	6	12.75	15	12.438	0.156
14″ Short Stubs Ends Short Type “C”	14	16.25	6	14	19.2	13.688	0.156
16″ Short Stubs Ends Short Type “C”	16	18.5	6	16	23.9	15.67	0.165
18″ Short Stubs Ends Short Type “C”	18	21	6	18	28.5	17.67	0.165
2 1/2″ Short Stubs Ends Short Type “C”	2.5	4.125	2.5	2.875	0.75	2.709	0.083
2″ Short Stubs Ends Short Type “C”	2	3.625	2.5	2.375	0.44	2.245	0.065
20″ Short Stubs Ends Short Type “C”	20	23	6	20	36.3	19.624	0.188
24″ Short Stubs Ends Short Type “C”	24	27.25	6	24	56	23.564	0.218
3″ Short Stubs Ends Short Type “C”	3	5	2.5	3.5	0.94	3.334	0.083
3/4″ Short Stubs Ends Short Type “C”	0.75	1.688	2	1.05	0.14	0.92	0.065
4″ Short Stubs Ends Short Type “C”	4	6.188	3	4.5	1.38	4.334	0.083
5″ Short Stubs Ends Short Type “C”	5	7.313	3	5.563	2.06	5.345	0.109
6″ Short Stubs Ends Short Type “C”	6	8.5	3.5	6.625	2.75	6.407	0.109
8″ Short Stubs Ends Short Type “C”	8	10.625	4	8.625	3.88	8.407	0.109

MD Exports LLP is the best approach to buy ASME B16.9 Stub End in India, producing ANSI B16.9 Buttweld Long Stub End & ASME B16.9 Stubs End Stainless Steel as per MSS SP-75 & BS1640, check SS Stubs Ends dimensions, Lap Joint Stub Ends material, Stub Ends Weight Chart, Long Stub Ends products, ASME B 16.9 Stub Ends sizes, Stub Ends specification, Stub Ends Stainless Steel tolerances, Short Stub Ends standards & codes.

ASME B16.9 Stub End Weight Chart

NPS inches	STUB ENDS
NPS inches	Sch. 5S	Sch. 10S	Sch. 40S	Sch. 80S
1/2	0.06	0.08	0.12	0.13
3/4	0.07	0.09	0.15	0.17
1	0.09	0.15	0.20	0.25
1 1/4	0.13	0.20	0.30	0.35
1 1/2	0.16	0.25	0.38	0.46
2	0.25	0.40	0.55	0.75
2 1/2	0.35	0.50	0.80	1.00
3	0.50	0.60	1.10	1.50
4	0.70	1.00	1.80	2.50
5	1.00	1.25	2.50	3.50
6	1.60	1.95	3.70	5.50
8	2.50	3.10	5.90	10.0
10	4.00	4.90	10.5	14.0
12	6.60	7.10	15.0	20.0
14	6.40	7.80	15.5	20.5
16	7.90	9.00	18.0	24.0
18	9.30	10.5	21.0	28.0
20	12.0	13.5	23.5	31.0
24	16.5	19.0	28.5	38.0
Approximate weights in kg, density 8 kg/dm3

End welding bevels of Stub End Fittings

NOMINAL PIPE SIZE (Inches)	NB	OD	THICKNESS	SCH 10	SCH 20	SCH 30	SCH 40	SCH 80
1/2	15NB	21.30	1.65	2.11	__	2.41	2.77	3.73
3/4	20NB	26.70	1.65	2.11	__	2.41	2.87	3.91
1	25NB	33.40	1.65	2.77	__	2.90	3.38	4.55
1 1/4	32NB	42.20	1.65	2.77	__	2.97	3.56	4.85
1 1/2	40NB	48.30	1.65	2.77	__	3.18	3.68	5.08
2	50NB	60.30	1.65	2.77	__	3.18	3.91	5.54
2 1/2	65NB	73.00	2.11	3.05	__	4.78	5.16	7.01
3	80NB	88.90	2.11	3.05	__	4.78	5.49	7.62
3 1/2	90NB	101.60	2.11	3.05	__	4.78	5.74	8.08
4	100NB	114.30	2.11	3.05	__	4.78	6.02	8.56
5	125NB	141.30	2.77	3.40	__	__	6.55	9.53
6	150NB	168.30	2.77	3.40	__	__	7.11	10.97
8	200NB	219.10	2.77	3.76	6.35	7.04	8.18	12.70
10	250NB	273.00	3.40	4.19	6.35	7.80	9.27	15.09
12	300NB	323.80	3.96	4.57	6.35	8.38	10.31	17.48
14	350NB	355.60	3.96	6.35	7.92	9.53	11.13	19.05
16	400NB	406.40	4.19	6.35	7.92	9.53	12.7	21.44
18	450NB	457.00	4.19	6.35	7.92	11.13	14.27	23.83
20	500NB	508.00	4.78	6.35	9.53	12.70	15.09	26.19
22	550NB	559.00	4.78	6.35	9.53	12.70	__	28.58
24	600NB	610.00	5.54	6.35	9.53	14.27	17.48	30.96

We manufacture & supply various SS Butt weld Long Stub End & approved ANSI B16.9 Long Stub Ends as per international standard to the regional oil companies such as ADNOC, SABIC, SAUDI ARAMCO, EIL, KNPC, KOC, PDO and QP through their approved vendors.

ASME B16.9 Short Stub Ends Length

Facing: 125-250 RMS (smooth finish)

welded version = w
= s seamless execution

Nominal	Schedule	D	t	G	F	R. Max.	kg / St.
1/2 “	10s	21.3	2.11	34.9	50.8	3.18	0.07	s
	40s		2.77				0.09	s
3/4 “	10s	26.7	2.11	42.9	50.8	3.18	0.10	s
	40s		2.87				0.12	s
1 “	10s	33.4	2.77	50.8	50.8	3.18	0.16	s / w
	40s		3.38				0.17	s
1 1/4 “	10s	42.2	2.77	63.5	50.8	4.76	0.22	s
	40s		3.56				0.25	s
1 1/2 “	10s	48.3	2.77	73.0	50.8	6.35	0.25	s / w
	40s		3.68				0.31	s
2 “	10s	60.3	2.77	92.1	63.5	7.94	0.43	s / w
	40s		3.91				0.61	s
2 1/2 “	10s	73.0	3.05	104.8	63.5	7.94	0.57	s / w
	40s		5.16				0.80	s
3 “	10s	88.9	3.05	127.0	63.5	9.53	0.73	s / w
	40s		5.49				1.13	s
4 “	10s	114.3	3.05	157.2	76.2	11.11	1.09	s / w
	40s		6.02				1.87	s
5 “	10s	141.3	3.40	185.7	76.2	11.11	1.47	s / w
	40s		6.55				2.28	s
6 “	10s	168.3	3.40	215.9	88.9	12.70	2.15	s / w
	40s		7.11				3.57	s / w
8 “	10s	219.1	3.76	269.9	101.6	12.70	3.22	s / w
	40s		8.18				6.07	s / w
10 “	10s	273.1	4.19	323.9	127.0	12.70	5.13	w
	40s		9.27				10.07	w
12 “	10s	323.9	4.57	381.0	152.4	12.70	8.16	w
	40s		9.53				14.29	w
14 “	10s	355.6	4.78	412.8	152.4	12.70	10.89	w
	40s		9.53				17.15	w
16 “	10s	406.4	4.78	469.9	152.4	12.70	12.70	w
	40s		9.53				20.41	w
18 “	10s	457.2	4.78	533.4	152.4	12.70	17.24	w
20 “	10s	508.0	5.54	584.2	152.4	12.70	21.77	w
24 “	10s	609.6	6.35	692.2	152.4	12.70	27.22	w

Dimensional Tolerances of Stub End Buttweld Fittings

DIMENSIONAL TOLERANCES – STUB ENDS
For all fittings				Stub Ends
Nominal Pipe Size (NPS)	Outside Ø at Bevel	Indide Ø at End	Wall Thickness t / t1	O.D. of Lap G	Fillet Radius of Lap – R	Overall Length. – F
1/2 a 2 1/2	1	0,8	Not	+0 -1	+0 -1	2
3 a 3 1/2	1	1,6	less	+0 -1	+0 -1	2
4	+2 -1	1,6	than	+0 -1	+0 -2	2
5 a 6	+3 -1	1,6	87,50%	+0 -1	+0 -2	2
8	2	1,6	of nominal	+0 -1	+0 -2	2
10	+4 -3	3,2	tickness	+0 -2	+0 -2	2
12 to 18	+4 -3	3,2		+0 -2	+0 -2	3
20 a 24	+6 -5	4,8		+0 -2	+0 -2	3
26 a 30	+7 -5	4,8
32 a 48	+7 -5	4,8

Check our clientele in Worldwide

Qatar Petrochemical Company
Doha, Qatar

SacOil Holdings Ltd
Bryanston, South Africa

Gulf Farabi Petrochemical
Jubail, Saudi Arabia

Tatweer Petroleum
Al Rumamin, Bahrain

Petrochemicals (Malaysia) Sdn. Bhd.
Johor, Malaysia.

ST Paper Resources PTE LTD
Chin Bee Rd, Singapore

JMC Projects (India) Limited
Mumbai, India

petrofac international
Abu Dhabi, United Arab Emirates

Kikuchi Industry (Thailand) Co., Ltd.
Bangkok, Thailand

United Pulp And Paper Co., Inc
Bulacan, Philippines

Tecnon OrbiChem Ltd
Croydon, UK

petrolimex corporation
Hà Nội, Vietnam

Exporter of Seamless Stub End Mss Sp 43, Carbon Steel Stub End Manufacturers in India. MSS SP-75 Stub End Type A Traders, Wholesaler Of DIN2609 Alloy Steel Lap Joint Stub End, 1/2 to 48 Inch Carbon Steel Stub End Buttweld Fittings stockist, ASTM Schedule 80 Stub End Copper dealer.

Check 8 Inch Stub End Dimensions, Best deals on bulk procurement of DN150 SS Pipe Fitting Stub End for piping connection. 6 Lap Joint Stub End stockholder and 2" 3/4" sch 40 Stub End EN 1092-1 Type 35/ EN 1092-1 Type 36 manufacturers, Special Price for ASME B 16.9 Buttweld Long Stub End & ANSI B16.9 BW Short Stub End.

Producing special sizes of EN 1092-1 Stub End, ASME B16.9 Short Stub End, Stub End Buttweld Fittings, ANSI B 16.9 Stub End & Copper Long Stub Ends for piping connection. If you have been searching for ASME B16.9 Stainless Steel Stub End, ASME B16.9 Long Stub End & Carbon Steel Short Stub End in India then contact MD Exports LLP, we holds a large stock of ASME B16.9 Stub End, 6 lap joint stub end, Monel stub end long pattern & mss short stub end.