Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ASME B16.9 Reducing Cross Pipe Fitting

One of India’s Largest Manufacturer Of ASME B16.9 Reducing Cross, MSS SP 75 Stainless Steel Buttweld Unequal Cross Suppliers In India

DIN2609 Carbon Steel Reducing Cross Tee At Lower Prices Compared To USA & UK, Seamless/ welded Grooved Reducing Cross manufacturer in India, Check ANSI B16.9 BW Reducing Cross Dimension And Weight Chart.

Unequal Cross Pipe Fitting is a type of pipe fitting that has four openings for fluid flow and is used to reduce the diameter of fluid flow. The outlet or the outlets are of smaller diameter than that of the inlet or the inlets of a ASME B16.9 Reducing Cross Pipe Fitting. The standardization makes the difference in sizes. For example, the ASME B16.9 Reducing Cross means that the nominal sizes could vary up to 48 inches.


ASME B16.9 Reducing Cross Pipe Fitting Manufacturer In India

ASME B16.9 Reducing Cross Pipe Fitting

Stainless Steel Buttweld Unequal Cross

Stainless Steel Unequal Cross

Carbon Steel Reducing Cross

Carbon Steel Reducing Cross

 

Table of contents

Check Our Global Sales Network For ASME B 16.9 Buttweld Copper Reducing Cross, View the Market price before you buy ANSI B16.9 SS Unequal Cross, MSS SP-75 Reducing Cross Pipe Fitting Available in a wide range of grades and shapes.

The Reducing Cross Dimensions can also be influenced by the material make, the piping diameters and the type of the fitting. Reducing Cross Pipe Fitting is less common in general industrial applications. There are only a few cases where this ASME B16.9 Reducing Cross Pipe Fitting is used such as the fires sprinklers on emergency systems or similar technologies in gardening, domestic applications and low cost applications.

Grooved Reducing Cross is a type of cross that is reducing and has grooves. Usually the threaded crosses have a female thread where the male threads of the pipes can fit in, but the male threaded crosses are also available. Reducing Cross Tee increases pressure and velocity at the point of connection. Because of the shape of the connection, the fluid flow is forced to select a plane of flow at the SS Unequal Cross connection. This, under high pressure or high temperatures could become a problem.


What is ASME B16.9 Reducing Cross?

ASME B16.9 Reducing Cross Pipe Fitting

Ansi B16.9 Pipe Reducing Cross Fittings are not used as replacements for other fittings in general. They are used only when they are the only choice. Different materials can compensate for the strength requirements such as the Carbon Steel Buttweld Reducing Cross or the Stainless Steel Buttweld Unequal Cross which can increase the stability of the metal and the fluid flow inside the Unequal Cross Fittings. The most applications of Asme B16.9 Unequal Cross are in the domestic water supply, water outlets in water purification systems, fire sprinklers, gardening and underground water piping with low pressure applications.


Carbon Steel Reducing Cross Price List

SR NO Description Piping Material Class / QTY PRICE (USD$)
1 REDUCING UNEQUAL CROSS: 10 NPS, SCH20, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, ASME B16.9 A01E 17 NOS $3
2 REDUCING UNEQUAL CROSS: 2 NPS, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, SCH80, ASME B16.9 A01E 24 NOS $30.00
3 REDUCING UNEQUAL CROSS: 8 NPS, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, SCH40, ASME B16.9 A03E 6 NOS $60.00
4 REDUCING UNEQUAL CROSS: 4 NPS, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, SCH40, ASME B16.9 A01E/A03E 18 NOS $50.00
5 REDUCING CROSS: 12 NPS, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, SCH20, ASME B16.9 A01E 4 NOS $3
6 REDUCING UNEQUAL CROSS: 8 NPS, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, SCH20, ASME B16.9 A01E 11 NOS $60.00
7 REDUCING UNEQUAL CROSS: 3 NPS, NACE MR-0175/ISO 15156, ASTM A 234-WPB, SMLS, BE, SCH40, ASME B16.9 A01E/ A03E 15 NOS $10.00

Please note this is an approx Price of black pipe reducing cross in India. For final stainless steel reducing cross Price List Please Call on + or drop an Email to [email protected].


Stainless Steel Reducing Cross Specification

Specifications ASME B16.9 Reducing Cross
ASME B16.9 Reducing Cross size Seamless Butt Weld Fittings: 1/2" - 10"
Welded Butt Weld Fittings: 1/2" - 48"
Reducing Cross Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Grooved Reducing Cross Type DN15-DN1200
Connection for Reducing Cross Tee Welding
Unequal Cross Pipe Fitting Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Reducing Cross FittingTypes Seamless / ERW / Welded / Fabricated Pipe Fittings
copper reducing cross Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
reducing cross pipe fitting Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Origin & Mills for stainless steel reducing cross Japanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Unequal Cross Fittings
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
reducing cross pipe fitting Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
SS Unequal Cross Fittings Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process for black pipe reducing cross Push, Press, Forge, Cast, etc.
Asme B16.9 Unequal Cross Application
  • Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • ANSI B16.9 Schedule 40 Reducing Cross have a thicker wall for higher-pressure applications.
  • ASME B16.9 Schedule 10 Reducing Cross are an economical alternative for lower-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Reducing Cross Pipe Fitting Material

Carbon Steel Buttweld Reducing Cross
  • ASTM A105 Unequal Crosses Pipe Fitting
  • ASME SA105 Reducing Cross Pipe Fitting
  • DIN 1.0402 Reducing Cross Fitting
  • DIN 1.0460 Grooved Reducing Cross
  • DIN 1.0619 Reducing Crosses Pipe Fitting
  • ASTM A105N Reducing Cross Pipe Fitting
  • ASME SA105N Reducing Cross Pipe Fitting
  • ASTM A350 LF2 Reducing Cross Fitting
  • ASME SA350 Grooved Reducing Crosses
  • High Yield CS ASTM A694 Unequal Cross Pipe Fitting
Nimonic Reducing Cross Tee Nimonic 75 Unequal Crosses, Nimonic 80A Unequal Cross, Nimonic 90 Unequal Cross Fittings
Other Reducing Cross Pipe Fitting material Tin bronze Reducing Fitting, Alumunum bronze Reducing Crosses Tee, Lead bronze Reducing Crosses Tee
Titanium Unequal Cross Fittings
  • ASTM B381 Titanium Gr. 1
  • ASTM B381 Titanium Gr. 2
  • ASTM B381 Titanium Gr. 4
  • ASTM B381 Titanium Gr. 5
  • ASTM B381 Titanium Gr. 7
Monel Reducing Cross Tee Monel 400 (UNS No. N04400) Unequal Crosses, Monel 500 (UNS No. N05500) reducing Crosses pipe fitting
Alloy 20 Grooved Reducing Cross Carpenter® 20 Alloy Reducing Crosses Tee, Alloy 20Cb-3 unequal Crosses pipe fitting
Aluminium Reducing Cross Fitting 5052 /6061/ 6063 / 2017 / 7075 / etc.
Stainless Steel Buttweld Unequal Cross
  • ASTM A182 F304 Reducing Cross Fitting
  • ASTM A182 F304L Reducing Cross Tee
  • ASTM A182 F316 Grooved Reducing Cross
  • ASTM A182 F316L Reducing Cross
  • ASTM A182 F317 Reducing Cross Tee
  • ASTM A182 F317L Unequal Cross Fittings
  • ASTM A182 F321 Reducing Cross
  • ASTM A182 F321H Reducing Crosses Fitting
  • ASTM A182 F347 Reducing Cross
  • ASTM A182 F347H Reducing Crosses Pipe Fitting
Nickel Unequal Cross Fittings Nickel 200 Reducing Cross, Nickel 201 Reducing Crosses Pipe Fitting
Duplex Unequal Cross Fittings S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex Reducing Cross S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Grooved Reducing Cross Incoloy 800 Reducing Crosses Pipe Fitting, Incoloy 800H Unequal Cross, Incoloy 800HT (UNS N08800) Reducing Cross Fitting, Incoloy 825 (UNS N08825) Unequal Crosses Fittings
254 Smo Reducing Cross SMO 254/6Mo Grooved Reducing Crosses, UNS S31254 Unequal Crosses, DIN 1.4547 Reducing Crosses Fitting
Alloy Steel Reducing Cross
  • ASTM A182 F5 Reducing Cross Fitting
  • ASTM A182 F9 Grooved Reducing Cross
  • ASTM A182 F11 Unequal Crosses Fittings
  • ASTM A182 F22 Reducing Crosses Tee
  • ASTM A182 F91 Reducing Crosses Fitting
Inconel Reducing Cross Fitting
  • Inconel 600 Grooved Reducing Cross
  • Inconel 601 Reducing Crosses Fitting
  • Inconel 625 Reducing Cross Pipe Fitting
  • Inconel 718 Reducing Cross Fittings
  • Inconel x750 Reducing Crosses
Copper Grooved Reducing Cross Fitting T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Grooved Reducing Crosses Copper Nickel 90/10 (C70600 ) Reducing Crosses, Cupro Nickel 70/30 (C71500) Unequal Crosses, UNS C71640 Grooved Reducing Crosses
Brass Reducing Cross Pipe Fitting 3602 / 2604 / H59 / H62 / etc.
Hastelloy Unequal Cross Fittings Hastelloy C276 (UNS N10276) Unequal Crosses, C22 (UNS N06022) Reducing Crosses, C4 Reducing Crosses, C2000 Reducing Crosses Fitting, B2 Grooved Reducing Crosses, B3 Reducing Crosses, X Reducing Cross Pipe Fitting

MD Exports LLP is an ISO certified Reducing Cross Pipe Fitting Suppliers & ductile iron reducing cross distributor in India


Types Of ASME B16.9 Reducing Cross

Stainless Steel Reducing Cross Pipe Fitting

Stainless Steel Reducing Cross Pipe Fitting

Carbon Steel Unequal Cross Pipe Fitting

Carbon Steel Unequal Cross Pipe Fitting

Copper Nickel Reducing Cross Pipe Fitting

Copper Nickel Reducing Cross Pipe Fitting

Malleable Iron Reducing Cross Fitting

Malleable Iron Reducing Cross Fitting

ASTM A234 WPB Grooved Reducing Cross

ASTM A234 WPB Grooved Reducing Cross

ASTM A234 WP11 Reducing Cross Tee

ASTM A234 WP11 Reducing Cross Tee

ASTM A234 WP22 Unequal Cross

ASTM A234 WP22 Unequal Cross

LTCS A420 WPL6 Unequal Cross Fittings

LTCS A420 WPL6 Unequal Cross Fittings

304 Stainless Steel Reducing Cross

304 Stainless Steel Reducing Cross

Ductile Iron Reducing Cross

Ductile Iron Reducing Cross

Black Pipe Reducing Cross

Black Pipe Reducing Cross

Copper Reducing Cross

Copper Reducing Cross


MD Exports LLP is a manufacturer and supplier of ASME B16.9 Stainless Steel Unequal Cross & Check Reducing Cross Pipe Fitting Dimensions, offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.


ASME B16.9 Reducing Cross Dimensions

ASME B16.9 Reducing Cross Dimensions
Nominal Diameter Outside Diameter Center to End
D1 D2
DN NPS Series A Series B Series A Series B C M
1*15 1/*1/2 21.3 18 21.3 18 25 25
1*10 1/*3/8 21.3 18 17.3 14 25 25
1*8 1/*1/4 21.3 18 13.7 10 25 25
2*20 3/*3/4 26.9 25 26.9 25 29 29
2*15 3/*1/2 26.9 25 21.3 18 29 29
2*10 3/*3/8 26.9 25 17.3 14 29 29
2*25 *1 33.7 32 33.7 32 38 38
2*20 *3/4 33.7 32 26.9 25 38 38
2*15 *1/2 33.7 32 21.3 18 38 38
3*32 1.1/*1.1/4 42.4 38 42.4 38 48 48
3*25 1.1/*1 42.4 38 33.7 32 48 48
3*20 1.1/*3/4 42.4 38 26.9 25 48 48
3*15 1.1/*1/2 42.4 38 21.3 18 48 48
4*40 1.1/*1.1/2 48.3 45 48.3 45 57 57
4*32 1.1/*1.1/4 48.3 45 42.4 38 57 57
4*25 1.1/*1 48.3 45 33.7 32 57 57
4*20 1.1/*3/4 48.3 45 26.9 25 57 57
4*15 1.1/*1/2 48.3 45 21.3 18 57 57
5*50 *2 60.3 57 60.3 57 64 64
5*40 *1.1/2 60.3 57 48.3 45 64 60
5*32 *1.1/4 60.3 57 42.4 38 64 57
5*25 *1 60.3 57 33.7 32 64 51
5*20 *3/4 60.3 57 26.9 25 64 44
6*65 2/1/*2.1/2 73.0 76 73.0 76 76 76
6*50 2/1/*2 73.0 76 60.3 57 76 70
6*40 2/1/*1.1/2 73.0 76 48.3 45 76 67
6*32 2/1/*1.1/4 73.0 76 42.4 38 76 64
6*25 2/1/*1 73.0 76 33.7 32 76 57
8*80 *3 88.9 89 88.9 89 86 86
8*65 *2.1/2 88.9 89 73.0 76 86 83
8*50 *2 88.9 89 60.3 57 86 76
8*40 *1.1/2 88.9 89 48.3 45 86 73
8*32 *1.1/4 88.9 89 42.4 38 86 70
9*90 3.1/*3.1/2 101.6 – 101.6 – 95 95
9*80 3.1/*3 101.6 – 88.9 89 95 92
9*65 3.1/*2.1/2 101.6 – 73.0 76 95 89
9*50 3.1/*2 101.6 – 60.3 57 95 83
9*40 3.1/*1.1/2 101.6 – 48.3 45 95 79
10*100 *4 114.3 108 114.3 108 105 105
10*90 *3.1/2 114.3 108 101.6 – 105 102
10*80 *3 114.3 108 88.9 89 105 98
10*65 *2.1/2 114.3 108 73.0 76 105 95
10*50 *2 114.3 108 60.3 57 105 89
10*40 *1.1/2 114.3 108 48.3 45 105 86
12*125 *5 141.3 133 141.3 133 124 124
12*100 *4 141.3 133 114.3 108 124 117
12*90 *3.1/2 141.3 – 101.6 – 124 114
12*80 *3 141.3 133 88.9 89 124 111
12*65 *2.1.2 141.3 133 73.0 76 124 108
12*50 *2 141.3 133 60.3 57 124 105
15*150 *6 168.3 159 168.3 159 143 143
15*125 *5 168.3 159 141.3 133 143 137
15*100 *4 168.3 159 114.3 108 143 130
15*90 *3.1/2 168.3 – 101.6 – 143 127
15*80 *3 168.3 159 88.9 89 143 124
15*65 *2.1/2 168.3 159 73.0 76 143 121
20*200 *8 219.1 219 219.1 219 178 178
20*150 *6 219.1 219 168.3 159 178 168
20*125 *5 219.1 219 141.4 133 178 162
20*100 *4 219.1 219 114.3 108 178 156
20*90 *3.1/2 219.1 – 101.6 – 178 152
25*250 1*10 273.0 273 273.0 273 216 216
25*200 1*8 273.0 273 219.1 219 216 203
25*150 1*6 273.0 273 168.3 159 216 194
25*125 1*5 273.0 273 141.3 133 216 191
25*100 1*4 273.0 273 114.3 108 216 184
30*300 1*12 323.9 325 323.9 325 254 254
30*250 1*10 323.9 325 273.0 273 254 241
30*200 1*8 323.9 325 219.1 219 254 229
30*150 1*6 323.9 325 168.3 159 254 219
30*125 1*5 323.9 325 141.3 133 254 216
35*350 1*14 355.6 377 355.6 377 279 279
35*300 1*12 355.6 377 323.9 325 279 270
35*250 1*10 355.6 377 273.0 273 279 257
35*200 1*8 355.6 377 219.1 219 279 248
35*150 1*6 355.6 377 168.3 159 279 238
40*400 1*16 406.4 426 406.4 426 305 305
40*350 1*14 406.4 426 355.6 377 305 305
40*300 1*12 406.4 426 323.9 325 305 295
40*250 1*10 406.4 426 273.0 273 305 283
40*200 1*8 406.4 426 219.1 219 305 273
40*150 1*6 406.4 426 168.3 159 305 264
45*450 1*18 457 480 457 480 343 343
45*400 1*16 457 480 406.4 426 343 330
45*350 1*14 457 480 355.6 377 343 330
45*300 1*12 457 480 323.9 325 343 321
45*250 1*10 457 480 273.0 273 343 308
45*200 1*8 457 480 219.1 219 343 298
50*500 2*20 508 530 508 530 381 381
50*450 2*20 508 530 457 480 381 368
50*400 2*20 508 530 406.4 426 381 356
50*350 2*20 508 530 355.6 377 381 356
50*300 2*20 508 530 323.9 325 381 346
50*250 2*20 508 530 273.0 273 381 333
50*200 2*20 508 530 219.1 219 381 324

MD Exports LLP is a Govt. approved certified ductile iron reducing cross manufactuers in India. All of our ASME B16.9 Reducing Cross Pipe Fitting are manufactured and tested to international standards, and specifications as per JIS, EN, DIN, ASTM etc. We are well-known as a trusted vendor as a ASME B16.9 black pipe reducing cross & copper reducing cross distributor in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.


Reducing Cross Pipe Fitting Weight Chart

Nominal Diameter Outside Diameter Center to End
D1 D2
DN NPS Series A Series B Series A Series B C M
1*15 1/*1/2 21.3 18 21.3 18 25 25
1*10 1/*3/8 21.3 18 17.3 14 25 25
1*8 1/*1/4 21.3 18 13.7 10 25 25
2*20 3/*3/4 26.9 25 26.9 25 29 29
2*15 3/*1/2 26.9 25 21.3 18 29 29
2*10 3/*3/8 26.9 25 17.3 14 29 29
2*25 *1 33.7 32 33.7 32 38 38
2*20 *3/4 33.7 32 26.9 25 38 38
2*15 *1/2 33.7 32 21.3 18 38 38
3*32 1.1/*1.1/4 42.4 38 42.4 38 48 48
3*25 1.1/*1 42.4 38 33.7 32 48 48
3*20 1.1/*3/4 42.4 38 26.9 25 48 48
3*15 1.1/*1/2 42.4 38 21.3 18 48 48
4*40 1.1/*1.1/2 48.3 45 48.3 45 57 57
4*32 1.1/*1.1/4 48.3 45 42.4 38 57 57
4*25 1.1/*1 48.3 45 33.7 32 57 57
4*20 1.1/*3/4 48.3 45 26.9 25 57 57
4*15 1.1/*1/2 48.3 45 21.3 18 57 57
5*50 *2 60.3 57 60.3 57 64 64
5*40 *1.1/2 60.3 57 48.3 45 64 60
5*32 *1.1/4 60.3 57 42.4 38 64 57
5*25 *1 60.3 57 33.7 32 64 51
5*20 *3/4 60.3 57 26.9 25 64 44
6*65 2/1/*2.1/2 73.0 76 73.0 76 76 76
6*50 2/1/*2 73.0 76 60.3 57 76 70
6*40 2/1/*1.1/2 73.0 76 48.3 45 76 67
6*32 2/1/*1.1/4 73.0 76 42.4 38 76 64
6*25 2/1/*1 73.0 76 33.7 32 76 57
8*80 *3 88.9 89 88.9 89 86 86
8*65 *2.1/2 88.9 89 73.0 76 86 83
8*50 *2 88.9 89 60.3 57 86 76
8*40 *1.1/2 88.9 89 48.3 45 86 73
8*32 *1.1/4 88.9 89 42.4 38 86 70
9*90 3.1/*3.1/2 101.6 – 101.6 – 95 95
9*80 3.1/*3 101.6 – 88.9 89 95 92
9*65 3.1/*2.1/2 101.6 – 73.0 76 95 89
9*50 3.1/*2 101.6 – 60.3 57 95 83
9*40 3.1/*1.1/2 101.6 – 48.3 45 95 79
10*100 *4 114.3 108 114.3 108 105 105
10*90 *3.1/2 114.3 108 101.6 – 105 102
10*80 *3 114.3 108 88.9 89 105 98
10*65 *2.1/2 114.3 108 73.0 76 105 95
10*50 *2 114.3 108 60.3 57 105 89
10*40 *1.1/2 114.3 108 48.3 45 105 86
12*125 *5 141.3 133 141.3 133 124 124
12*100 *4 141.3 133 114.3 108 124 117
12*90 *3.1/2 141.3 – 101.6 – 124 114
12*80 *3 141.3 133 88.9 89 124 111
12*65 *2.1.2 141.3 133 73.0 76 124 108
12*50 *2 141.3 133 60.3 57 124 105
15*150 *6 168.3 159 168.3 159 143 143
15*125 *5 168.3 159 141.3 133 143 137
15*100 *4 168.3 159 114.3 108 143 130
15*90 *3.1/2 168.3 – 101.6 – 143 127
15*80 *3 168.3 159 88.9 89 143 124
15*65 *2.1/2 168.3 159 73.0 76 143 121
20*200 *8 219.1 219 219.1 219 178 178
20*150 *6 219.1 219 168.3 159 178 168
20*125 *5 219.1 219 141.4 133 178 162
20*100 *4 219.1 219 114.3 108 178 156
20*90 *3.1/2 219.1 – 101.6 – 178 152
25*250 1*10 273.0 273 273.0 273 216 216
25*200 1*8 273.0 273 219.1 219 216 203
25*150 1*6 273.0 273 168.3 159 216 194
25*125 1*5 273.0 273 141.3 133 216 191
25*100 1*4 273.0 273 114.3 108 216 184
30*300 1*12 323.9 325 323.9 325 254 254
30*250 1*10 323.9 325 273.0 273 254 241
30*200 1*8 323.9 325 219.1 219 254 229
30*150 1*6 323.9 325 168.3 159 254 219
30*125 1*5 323.9 325 141.3 133 254 216
35*350 1*14 355.6 377 355.6 377 279 279
35*300 1*12 355.6 377 323.9 325 279 270
35*250 1*10 355.6 377 273.0 273 279 257
35*200 1*8 355.6 377 219.1 219 279 248
35*150 1*6 355.6 377 168.3 159 279 238
40*400 1*16 406.4 426 406.4 426 305 305
40*350 1*14 406.4 426 355.6 377 305 305
40*300 1*12 406.4 426 323.9 325 305 295
40*250 1*10 406.4 426 273.0 273 305 283
40*200 1*8 406.4 426 219.1 219 305 273
40*150 1*6 406.4 426 168.3 159 305 264
45*450 1*18 457 480 457 480 343 343
45*400 1*16 457 480 406.4 426 343 330
45*350 1*14 457 480 355.6 377 343 330
45*300 1*12 457 480 323.9 325 343 321
45*250 1*10 457 480 273.0 273 343 308
45*200 1*8 457 480 219.1 219 343 298
50*500 2*20 508 530 508 530 381 381
50*450 2*20 508 530 457 480 381 368
50*400 2*20 508 530 406.4 426 381 356
50*350 2*20 508 530 355.6 377 381 356
50*300 2*20 508 530 323.9 325 381 346
50*250 2*20 508 530 273.0 273 381 333
50*200 2*20 508 530 219.1 219 381 324

We are one of the leading manufacturers and approved ASME B16.9 Reducing Cross Pipe Fitting, Unequal Cross Pipe Fitting & ASME B16.9 Reducing Cross suppliers in India, MD Exports LLP holds a large stock of Alloy Steel Grooved Reducing Cross & Stainless Steel Buttweld Unequal Cross.


Supplying ASME B16.9 Reducing Cross to our Worldwide Clients:

ST PAPER RESOURCES PTE LTD

ST Paper Resources PTE LTD
Chin Bee Rd, Singapore

JMC Projects (India) Limited

JMC Projects (India) Limited
Mumbai, India

Qatar Petrochemical Company

Qatar Petrochemical Company
Doha, Qatar

SacOil Holdings Ltd

SacOil Holdings Ltd
Bryanston, South Africa

Tecnon OrbiChem Ltd

Tecnon OrbiChem Ltd
Croydon, UK

petrolimex corporation

petrolimex corporation
Hà Nội, Vietnam

United Pulp And Paper Co., Inc

United Pulp And Paper Co., Inc
Bulacan, Philippines

Kikuchi Industry (Thailand) Co., Ltd.

Kikuchi Industry (Thailand) Co., Ltd.
Bangkok, Thailand

Petrochemicals (Malaysia) Sdn. Bhd.

Petrochemicals (Malaysia) Sdn. Bhd.
Johor, Malaysia.

petrofac international

petrofac international
Abu Dhabi, United Arab Emirates

Gulf Farabi Petrochemical

Gulf Farabi Petrochemical
Jubail, Saudi Arabia

Tatweer Petroleum

Tatweer Petroleum
Al Rumamin, Bahrain


Most reliable supplier Of High Pressure Pipeline Welded Stainless Steel Reducing Cross, One of the oldest manufacturer Of Seamless/ welded Black Pipe Reducing Cross in India. Keep bulk stock of Carbon Steel Buttweld Reducing Cross And Stainless Steel Buttweld Unequal Cross. Buy directly from ASME B16.9 Unequal Cross Manufacturer in Mumbai.
Check Availability Of Buttweld schedule 80 Unequal Cross, High Pressure Pipeline Welded Reducing Cross Pipe Fitting Approved by Saudi Aramco, Stockist Of ASTM Schedule 80 Ductile Iron Reducing Cross, DN150 Reducing Cross Fitting Wholesaler, Traders Of 2" 3/4" sch 40 SS Unequal Cross In Mumbai, ASME B16.9 Reducing Cross Pipe Fitting Manufacturer in India. Dealer Of DN250 Sch40 SS Butt weld Reducing Cross. Best deals on bulk procurement of ASME B16.9 Reducing Cross for piping connection.

Contact MD Exports LLP to buy the highest quality and reasonably priced ASME B16.9 Reducing Cross Pipe Fitting, Stainless Steel Unequal Cross, ASME B16.9 Reducing Cross, Carbon Steel Reducing Cross Tee & ASME B 16.9 Buttweld Copper Reducing Cross in Qatar, UAE, Kuwait, Saudi Arabia, Oman, Dubai (UAE), Malaysia, USA, Sharjah - UAE, Melbourne, Brisbane, Perth, Australia, Nigeria, Pretoria - South Africa, Russia, Romania, Singapore, UK, Cebu - Philippines, Deira, Europe, Egypt, Gauteng - South Africa, Jubail - Saudi Arabia, Spain, Salem -Tamil Nadu, Turkey, Taiwan.

Check Reducing Cross Pipe Fitting Dimensions & Weight Chart

© MD Exports LLP. All rights reserved. Manufacturer, Stockholder, Supplier, Traders, Wholesaler, Dealer, Distributor, importer, exporter of pipe fittings, forgings & Flanges in Mumbai, India.

Our Overseas Distributors Of Steel Forging Countries
Malaysia, Argentina, Panama, Qatar, Saudi Arabia, Brazil, UAE, Turkey.