Steel Pipe Fittings And Flanges Suppliers In UAE, Qatar, Kuwait, Oman, Malaysia, Canada, Venezuela, USA.

AWWA C207 Flange

Check Stainless Steel Awwa C207 Class D Flange Dimensions, Carbon Steel AWWA C207 Steel Pipe Flanges Manufacturers In india.

View Low Alloy Steel Awwa C207 Flanges Standard, Get instant delivery of Copper Nickel Awwa C207 Class E Hub Flange, Ready stock of Awwa C207 Flange Material.

Typically, the AWWA C207 Flange is commonly used in wastewater, waterworks, slurry, plant piping or other light duty applications. Generally speaking the awwa c207 flange gasket is used in applications where the requirement for pressures is less than 300 psi. Pressure ratings for these flanges norma awwa c207 ranges from the awwa c207 class b flanges which stands rated at about 86 psi to Class F flanges, rated at 300 psi. Amongst all the AWWA flanges produced all over the world, awwa c207 class d hub flange are by far the most commonly specified amongst the other  AWWA flange users. Class D flanges carry a pressure rating of 175 psi for sizes below 12 incles  and a pressure rating for 150 psi for sizes 12 inches and larger. The awwa c207 class e slip on flange ratings are only applicable at atmospheric temperature.


AWWA C207 Flange Manufacturer In India

AWWA C207 Flange

Copper Nickel Awwa C207 Class E Hub Flange

Copper Nickel Awwa C207 Class E Hub Flange

Low Alloy Steel Awwa C207 Flanges Standardn

Low Alloy Steel Awwa C207 Flanges Standardn

 

Table of contents

Distributors of Malleable Iron Awwa C207 Class D Slip On Flange, Also Check Awwa C207 Blind Flange Weight, Available stock of Awwa C207 Class D Steel Ring Flange, Supply High Quality Flange Norma Awwa C207 With Low Price In India.

Frequently used materials in order to produce these flanges include the ASTM A-36 or ASTM A-283 plate steels or ASTM A181 or A105 forged steel, thereby meeting the requirements set forth by  awwa c207 flange material.


What is AWWA C207 Flange?

AWWA C207 Flange

The awwa c207 flange carbon steel are normally supplied as flat faced, unless raised face is specified by the client. At our factory, these awwa c207 steel pipe flanges are customarily stamped with manufacturing details such as the trademark, nominal size, class, material designation as well as heat. In comparison to the ANSI standard, the awwa c207 flanges standard includes ratings for a much broader range of nominal pipe sizes. For instance, while ANSI only covers sizes 1/2″ to 24″, the  awwa c207 class e flanges covers ratings for sizes which range between 3″ up to 144″. The standard, according to awwa c207 flanges manufacturers in India only encompasses flanges in the shape of ring, hub type, blind flanges, as well as threaded iron flanges.


Awwa C207 Flanges Price List

SR NO QTY Description PRICE (USD$)
1 60 Flange 6" 300 RF Blind Stainless Steel A/SA182 $64.79
2 36 Flange 8" 300 RF Blind Stainless Steel A/SA182 $101.80
3 240 Flange 16" 150 RF Blind Stainless Steel A/SA182 $198.40
4 30 Flange 3" 300 RF Slip on Stainless Steel A/SA182 $34.55
5 120 Flange 4" 150 RF Slip on Stainless Steel A/SA182 $23.40
6 20 Flange 4" 300 RF Slip on Stainless Steel A/SA182 $42.80
7 50 Flange 6" 300 RF Slip on Stainless Steel A/SA182 $67.80
8 20 Flange 10" 150 RF Slip on Stainless Steel A/SA182 $69.76
9 50 Flange 2" RF Blind Stainless Steel A/SA182 $10.84
10 20 Flange 2" 300 RF Blind Stainless Steel A/SA182 $16.32
11 20 Flange 3" 300 RF Blind Stainless Steel A/SA182 $28.22
12 50 Flange 12" 150 RF Slip on Stainless Steel A/SA182 $114.75
13 240 Flange 16" 150 RF Slip on Stainless Steel A/SA182 $182.00
14 60 Flange 24" 150 RF Slip on Stainless Steel A/SA182 $470.00
15 150 Flange 2" RF Threaded Stainless Steel A/SA182 $12.27
16 100 Flange 2" 600 RF Threaded Stainless Steel A/SA182 $32.53
17 200 Flange 4" 150 STD RF Weld neck Stainless Steel A/SA182 $26.90

Please note this is an approx Price of Stainless Steel Awwa C207 Class D Flange in India. For final Carbon Steel AWWA C207 Steel Pipe Flanges Price List Please Call on + or drop an Email to [email protected].


Specification Of Awwa C207 Steel Pipe Flanges

Specifications AWWA C207 Flanges
ASME B16.5 AWWA Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
AWWA Flanges Standards ANSI/ASME B16.5, B16.48, B16.47 Series A & B, BS4504, BS 10, EN-1092, DIN, BS Flanges, ANSI Flanges, ASME Flanges, DIN Flanges, EN Flanges, GOST Flanges.
AWWA Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
AWWA Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
AWWA Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
AWWA Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
AWWA Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Flange Bolts, Ring Joint
AWWA Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of AWWA Flanges
  • Socket Weld Ring Flange (SWRF), AWWA
  • Threaded Ring Flange, AWWA
  • Lap Joint Ring Flange (LJRF), AWWA
  • Weld Neck Ring Flange (WNRF), AWWA
  • Slip-On Ring Flange (SORF), AWWA
  • Blind Ring Flange (BLRF), AWWA
  • Ring Type Joint Flange (RTJF), AWWA
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Large Male-Female (LMF), Ring Type Joint (RTJ), Flat Face (FF), Lap-Joint Face (LJF), Small Tongue, Small Male-Female (SMF), Large Tongue & Groove, , Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

AWWA Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Test Direct-reading Spectrograph, UI trasonic flaw detector, Hydrostatic testing machine, X-ray detector, Magnetic particle detector
Equipment Press machine, electric bevelling machine, Bending machine, Pushing Machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • AWWA Sorf Flange
  • AWWA Blind Flanges
  • AWWA Table Flanges
  • AWWA Weld Neck Flanges
  • Rtj Flange
  • Pn16 Flange
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • AWWA Large Diameter Flange
  • AWWA Threaded Flanges
  • AWWA Loose Flanges
  • AWWA Orifice Flanges
  • AWWA AS 4087 Water Flanges
  • AWWA Slip-On Flanges
  • AWWA Socketweld Flanges
  • AWWA Plate Flanges
  • AWWA Lap Joint Flanges
AWWA C207 Flanges Standard

ANSI DIN, AS2129, AWWA, GOST, JIS, UNI, BS, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, JIS/ KS Flange, EN1092-1 Flange, UNI Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.36, ANSI B16.47, MSS SP44, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2627, DIN 2628, DIN 2629, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for AWWA Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Export to Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Korea, Iran, India, Brazil, Thailand, Egypt, Oman, Dubai, Peru, etc
AWWA C207 Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Gas, Metallurgy, Power, Chemical, Construction, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Awwa C207 Class B Flanges Material

Alloy 20 AWWA C207 Flanges ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Incoloy AWWA C207 Flanges ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges
Aluminium AWWA C207 Flanges 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel AWWA C207 Flanges ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
Duplex AWWA C207 Flanges S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex AWWA C207 Flanges S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
254 Smo AWWA C207 Flanges SMO 254/6Mo, ASTM A182 / ASME SA182, UNS S31254, DIN 1.4547
Brass AWWA C207 Flanges 3602 / 2604 / H59 / H62 / etc.
Nimonic AWWA C207 Flanges Nimonic 75, Nimonic 80A, Nimonic 90
Stainless Steel AWWA C207 Flanges ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Carbon Steel AWWA C207 Flanges ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Monel AWWA C207 Flanges ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Alloy Steel AWWA C207 Flanges ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
Titanium AWWA C207 Flanges ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7
ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
Inconel AWWA C207 Flanges ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 AWWA C207
Hastelloy AWWA C207 Flanges ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges
Copper Nickel AWWA C207 Flanges ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Copper AWWA C207 Flanges T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Other AWWA C207 Flanges material Aluminium bronze, Tin bronze, Lead bronze

We maintain wide range of Low Alloy Steel Awwa C207 Flanges Standard stock. Copper Nickel Awwa C207 Class E Hub Flange are known for excellent performance, resistance against corrosion and durability. Looking to buy Awwa C207 Flange Material at best price in India, price list of Malleable Iron Awwa C207 Class D Slip On Flange including awwa c207 steel pipe flanges.


Type Of AWWA C207 Flange

Stainless Steel Awwa C207 Class B Flanges

Stainless Steel Awwa C207 Class B Flanges

Carbon Steel Awwa C207 Class E Flanges

Carbon Steel Awwa C207 Class E Flanges

Alloy Steel Awwa C207 Class F Flanges

Alloy Steel Awwa C207 Class F Flanges

Malleable Iron Awwa C207 Class D Ring Flanges

Malleable Iron Awwa C207 Class D Ring Flanges

Tabela D Flanges Awwa C207

Tabela D Flanges Awwa C207

Flanges Norma Awwa C207

Flanges Norma Awwa C207

Titanium Awwa C207 Class E Slip On Flange

Titanium Awwa C207 Class E Slip On Flange

ASME SA105N Awwa C207 Class D Ring Flange

ASME SA105N Awwa C207 Class D Ring Flange

Copper Awwa C207 Blind Flange

Copper Awwa C207 Blind Flange

Flange Awwa C207 Cl D

Flange Awwa C207 Cl D

Duplex Steel Awwa C207 Class D Hub Flange

Duplex Steel Awwa C207 Class D Hub Flange

Copper Nickel Awwa C207 Class E Hub Flange

Copper Nickel Awwa C207 Class E Hub Flange


Awwa C207 Flange Dimensions

Awwa C207 Flange Dimensions


standard No. size PN Type Material
AWWA C207 4"–144" Class B,D,E,F T/1 PL

A105,A181 A36,
A516Gr.60,65,70

AWWA C207 Class 125 LW Class E Flange

AWWA C207 Class 125 LW Class E Flange

C207 Class B Ring Flange (86 psi*)

Nom Size Thickness Drilling Weight
OD Slip-On Blind Bore Bolt Circle Hole Dia No. Holes Slip-on Blind
A T T B C
4 9.00 0.625 0.625 4.57 7.50 0.750 8 8 11
5 10.00 0.625 0.625 5.66 8.50 0.875 8 9 14
6 11.00 0.688 0.688 6.72 9.50 0.875 8 11 19
8 13.50 0.688 0.688 8.72 11.75 0.875 8 15 28
10 16.00 0.688 0.688 10.88 14.25 1.000 12 19 39
12 19.00 0.688 0.719 12.88 17.00 1.000 12 28 58
14 21.00 0.688 0.791 14.19 18.75 1.125 12 34 78
16 23.50 0.688 0.892 16.19 21.25 1.125 16 41 110
18 25.00 0.688 0.950 18.19 22.75 1.250 16 41 132
20 27.50 0.688 1.040 20.19 25.00 1.250 20 49 175
22 29.50 0.750 1.132 22.19 27.25 1.375 20 57 219
24 32.00 0.750 1.216 24.19 29.50 1.375 20 67 277
26 34.25 0.812 1.307 26.19 31.75 1.375 24 80 341
28 36.50 0.875 1.398 28.19 34.00 1.375 28 94 414
30 38.75 0.875 1.477 30.19 36.00 1.375 28 105 493
32 41.75 0.936 1.581 32.19 38.50 1.625 28 132 613
34 43.75 0.938 1.661 34.19 40.50 1.625 32 137 707
36 46.00 1.000 1.751 36.19 42.75 1.625 32 161 824
38 48.75 1.000 1.853 38.19 45.25 1.625 32 185 980
40 50.75 1.000 1.933 40.19 47.25 1.625 36 193 1108
42 53.00 1.125 2.023 42.19 49.50 1.625 36 234 1264
44 55.25 1.125 2.114 44.19 51.75 1.625 40 249 1436
46 57.25 1.125 2.194 46.19 53.75 1.625 40 260 1600
48 59.50 1.250 2.285 48.19 56.00 1.625 44 306 1800
50 61.75 1.250 2.377 50.19 58.25 1.875 44 317 2017
52 64.00 1.250 2.468 52.19 60.50 1.875 44 339 2249
54 66.25 1.375 2.559 54.19 62.75 1.875 44 397 2499
60 73.00 1.500 2.820 60.19 69.25 1.875 52 508 3344
66 80.00 1.625 3.092 66.19 76.00 1.875 52 664 4403
72 86.50 1.750 3.353 72.19 82.50 1.875 60 802 5582
78 93.00 2.000 78.19 89.00 2.125 64 1000
84 99.75 2.000 84.19 95.50 2.125 64 1145
90 106.50 2.250 90.19 102.00 2.438 68 1404
96 113.25 2.250 96.19 108.50 2.438 68 1586
102 120.00 2.500 102.19 114.50 2.688 72 1912
108 126.75 2.500 108.19 120.75 2.688 72 2136
114 133.50 2.750 114.19 126.75 2.938 76 2525
120 140.25 2.750 120.19 132.75 2.938 76 2795
126 147.00 3.000 126.19 139.25 3.188 80 3252
132 153.75 3.000 132.19 145.75 3.188 80 3572
138 160.50 3.250 138.19 152.00 3.438 84 4101
144 167.25 3.250 144.19 158.25 3.438 84 4475

AWWA C207 Flanges Dimensions are in inches. Weights are in pounds.
Note: *Pressure rating at atmospheric temperature is 86 psi. These flanges have the same OD and drilling as ANSI/ ASME B16.1 class 125 cast-iron flanges. In sizes 24in. and smaller, they also match ANSI/ASME B16.5 150-psi standard for steel flanges.


C207 Class D Ring Flange (175-150 psi)

Nom Size Thickness Drilling Weight
OD Slip-On Blind Bore Bolt Circle Hole Dia No Holes Slip-on Blind
A T T B C
4 9.00 0.625 0.625 4.57 7.50 0.750 8 8 11
5 10.00 0.625 0.650 5.66 8.50 0.875 8 9 14
6 11.00 0.688 0.693 6.72 9.50 0.875 8 11 19
8 13.50 0.688 0.812 8.72 11.75 0.875 8 15 33
10 16.00 0.688 0.953 10.88 14.25 1.000 12 19 54
12 19.00 0.812 1.117 12.88 17.00 1.000 12 33 90
14 21.00 0.938 1.133 14.19 18.75 1.125 12 47 111
16 23.50 1.000 1.265 16.19 21.25 1.125 16 60 155
18 25.00 1.062 1.331 18.19 22.75 1.250 16 64 185
20 27.50 1.125 1.448 20.19 25.00 1.250 20 79 244
22 29.50 1.188 1.568 22.19 27.25 1.375 20 90 304
24 32.00 1.250 1.661 24.19 29.50 1.375 20 112 378
26 34.25 1.312 1.786 26.19 31.75 1.375 24 129 466
28 36.50 1.312 1.906 28.19 34.00 1.375 28 141 565
30 38.75 1.375 2.008 30.19 36.00 1.375 28 164 671
32 41.75 1.500 2.150 32.19 38.50 1.625 28 211 834
34 43.75 1.500 2.252 34.19 40.50 1.625 32 220 959
36 46.00 1.625 2.370 36.19 42.75 1.625 32 261 1116
38 48.75 1.625 2.506 38.19 45.25 1.625 32 301 1325
40 50.75 1.625 2.609 40.19 47.25 1.625 36 313 1438
42 53.00 1.750 2.729 42.19 49.50 1.625 36 364 1706
44 55.25 1.750 2.849 44.19 51.75 1.625 40 387 1935
46 57.25 1.750 2.952 46.19 53.75 1.625 40 404 2153
48 59.50 1.875 3.072 48.19 56.00 1.625 44 460 2420
50 61.75 2.000 3.196 50.19 58.25 1.875 44 507 2712
52 64.00 2.000 3.315 52.19 60.50 1.875 44 542 3021
54 66.25 2.125 3.435 54.19 62.75 1.875 44 614 3355
60 73.00 2.250 3.779 60.19 69.25 1.875 52 763 4481
66 80.00 2.500 4.136 66.19 76.00 1.875 52 1021 5890
72 86.50 2.625 4.480 72.19 82.50 1.875 60 1203 7458
78 93.00 2.750 78.19 89.00 2.125 64 1374
84 99.75 2.875 84.19 95.50 2.125 64 1646
90 106.50 3.000 90.19 102.00 2.438 68 1872
96 113.25 3.250 96.19 108.50 2.438 68 2291
102 120.00 3.250 102.19 114.50 2.688 72 2485
108 126.75 3.375 108.19 120.75 2.688 72 2884
114 133.50 3.500 114.19 126.75 2.938 76 3214
120 140.25 3.500 120.19 132.75 2.938 76 3558
126 147.00 3.750 126.19 139.25 3.188 80 4065
132 153.75 3.875 132.19 145.75 3.188 80 4614
138 160.50 4.000 138.19 152.00 3.438 84 5047
144 167.25 4.125 144.19 158.25 3.438 84 5680

AWWA C207 Flanges Dimensions are in inches. Weights are in pounds.
Note: *Pressure rating at atmospheric temperature: sizes 4-12 in. inclusive, 175 psi; sizes larger than 12 in., 150 psi. These flanges have the same OD and drilling as ANSI/ASME B16.1 class 125 cast-iron flanges. In sizes 24in. and smaller, they also match ANSI/ASME B16.5 150-psi standard for steel flanges.


C207 Class D Hub Flange (175-150 psi*)

Nom Size Drilling
OD Thickness Overall Thickness Dia at Base Bore Bolt Circle Hole Dia No. Holes Weight
A T

L

 E B C
4 9.00 0.500 0.875 5.312 4.57 7.50 0.750 8 7
5 10.00 0.562 1.250 6.312 5.66 8.50 0.875 8 9
6 11.00 0.562 1.250 7.562 6.72 9.50 0.875 8 11
8 13.50 0.562 1.250 9.688 8.72 11.75 0.875 8 15
10 16.00 0.688 1.250 12.000 10.88 14.25 1.000 12 22
12 19.00 0.688 1.250 14.375 12.88 17.00 1.000 12 33
14 21.00 0.750 1.250 15.750 14.19 18.75 1.125 12 43
16 23.50 0.750 1.250 18.000 16.19 21.25 1.125 16 52
18 25.00 0.750 1.250 19.875 18.19 22.75 1.250 16 52
20 27.50 0.750 1.250 22.000 20.19 25.00 1.250 20 61
22 29.50 1.000 1.750 24.250 22.19 27.25 1.375 20 92
24 32.00 1.000 1.750 26.125 24.19 29.50 1.375 20 105
26 34.25 1.000 1.750 28.500 26.19 31.75 1.375 24 119
28 36.50 1.000 1.750 30.500 28.19 34.00 1.375 28 130
30 38.75 1.000 1.750 32.500 30.19 36.00 1.375 28 144
32 41.75 1.125 1.750 34.750 32.19 38.50 1.625 28 182
34 43.75 1.125 1.750 36.750 34.19 40.50 1.625 32 191
36 46.00 1.125 1.750 38.750 36.19 42.75 1.625 32 207
38 48.75 1.125 1.750 40.750 38.19 45.25 1.625 32 237
40 50.75 1.125 1.750 43.000 40.19 47.25 1.625 36 249
42 53.00 1.250 1.750 45.000 42.19 49.50 1.625 36 287
44 55.25 1.250 2.250 47.000 44.19 51.75 1.625 40 334
46 57.25 1.250 2.250 49.000 46.19 53.75 1.625 40 348
48 59.50 1.375 2.500 51.000 48.19 56.00 1.625 44 407
50 61.75 1.375 2.500 53.000 50.19 58.25 1.875 44 421
52 64.00 1.375 2.500 55.000 52.19 60.50 1.875 44 448
54 66.25 1.375 2.500 57.000 54.19 62.75 1.875 44 475
60 73.00 1.500 2.750 63.000 60.19 69.25 1.875 52 605
66 80.00 1.500 2.750 69.000 66.19 76.00 1.875 52 718
72 86.50 1.500 2.750 75.000 72.19 82.50 1.875 60 803
78 93.00 1.750 3.000 81.250 78.19 89.00 2.125 64 1010
84 99.75 1.750 3.000 87.500 84.19 95.50 2.125 64 1160
90 106.50 2.000 3.250 93.750 90.19 102.00 2.438 68 1430
96 113.25 2.000 3.250 100.000 96.19 108.50 2.438 68 1618

AWWA C207 Flanges Dimensions are in inches. Weights are in pounds.
Note: Hub flanges are to be used on pipe that has an OD equal to the nominal pipe size in the first column. *Pressure rating at atmospheric temperature: sizes 4-12 in. inclusive, 175 psi; sizes larger than 12 in., 150 psi. These flanges have the same OD and drilling as ANSI/ASME B16.1 class 125 cast-iron flanges. In sizes 24in. and smaller, they also match ANSI/ASME B16.5 150-psi standard for steel flanges.


Class E Steel Ring Flange (275 psi*)

Nom Size Thickness Drilling Weight
OD Slip-On Blind Bore Bolt Circle Hole Dia No. Holes Slip-on Blind
A T T B C
4 9.00 1.125 1.125 4.57 7.50 0.750 8 14 20
5 10.00 1.188 1.188 5.66 8.50 0.875 8 16 26
6 11.00 1.313 1.313 6.72 9.50 0.875 8 20 35
8 13.50 1.500 1.500 8.72 11.75 0.875 8 33 61
10 16.00 1.563 1.563 10.88 14.25 1.000 12 44 89
12 19.00 1.750 1.750 12.88 17.00 1.000 12 71 141
14 21.00 1.875 1.875 14.19 18.75 1.125 12 94 184
16 23.50 2.000 2.000 16.19 21.25 1.125 16 120 246
18 25.00 2.125 2.125 18.19 22.75 1.250 16 127 296
20 27.50 2.375 2.375 20.19 25.00 1.250 20 168 400
22 29.50 2.500 2.500 22.19 27.25 1.375 20 189 484
24 32.00 2.625 2.625 24.19 29.50 1.375 20 234 598
26 34.25 2.750 2.750 26.19 31.75 1.375 24 270 718
28 36.50 2.750 2.750 28.19 34.00 1.375 28 297 815
30 38.75 2.875 2.875 30.19 36.00 1.375 28 344 961
32 41.75 3.000 3.000 32.19 38.50 1.625 28 422 1163
34 43.75 3.000 3.050 34.19 40.50 1.625 32 441 1299
36 46.00 3.125 3.209 36.19 42.75 1.625 32 502 1511
38 48.75 3.125 3.394 38.19 45.25 1.625 32 580 1795
40 50.75 3.250 3.533 40.19 47.25 1.625 36 626 2025
42 53.00 3.375 3.695 42.19 49.50 1.625 36 701 2309
44 55.25 3.375 3.857 44.19 51.75 1.625 40 747 2715
46 57.25 3.438 3.997 46.19 53.75 1.625 40 794 2813
48 59.50 3.500 4.159 48.19 56.00 1.625 44 858 3276
50 61.75 3.500 4.327 50.19 58.25 1.875 44 887 3671
52 64.00 3.625 4.489 52.19 60.50 1.875 44 982 4091
54 66.25 3.750 4.651 54.19 62.75 1.875 44 1083 4542
60 73.00 3.875 5.116 60.19 69.25 1.875 52 1313 6066
66 80.00 4.250 5.601 66.19 76.00 1.875 52 1736 7976
72 86.50 4.375 6.066 72.19 82.50 1.875 60 2005 10099
78 93.00 4.750 78.19 89.00 2.125 64 2374
84 99.75 4.750 84.19 95.50 2.125 64 2719
90 106.50 5.125 90.19 102.00 2.438 68 3197
96 113.25 5.125 96.19 108.50 2.438 68 3613
102 120.00 5.500 102.19 114.50 2.688 72 4206
108 126.75 5.500 108.19 120.75 2.688 72 4700
114 133.50 5.875 114.19 126.75 2.938 76 5395
120 140.25 5.875 120.19 132.75 2.938 76 5972
126 147.00 6.250 126.19 139.25 3.188 80 6775
132 153.75 6.250 132.19 145.75 3.188 80 7442
138 160.50 6.750 138.19 152.00 3.438 84 8517
144 167.25 6.750 144.19 158.25 3.438 84 9295

AWWA C207 Flanges Dimensions are in inches. Weights are in pounds.
Note: *Pressure rating at atmospheric temperature is 275 psi. These flanges have the same OD and drilling as ANSI/ASME B16.1 class 125 cast-iron flanges. In sizes 24in. and smaller, they also match ANSI/ASME B16.5 150-psi standard for steel flanges.


C207 Class E Hub Flange (275 psi*)

Nom Siz Drillin
OD Thickness Overall Thickness Dia at Base Bore Bolt Circle Hole Dia No. Holes Weight
A T L E B C
4 9.00 0.938 1.312 5.312 4.57 7.50 0.750 8 13
5 10.00 0.938 1.438 6.438 5.66 8.50 0.875 8 14
6 11.00 1.000 1.562 7.562 6.72 9.50 0.875 8 17
8 13.50 1.125 1.750 9.688 8.72 11.75 0.875 8 28
10 16.00 1.188 1.938 12.000 10.88 14.25 1.000 12 37
12 19.00 1.250 2.188 14.375 12.88 17.00 1.000 12 59
14 21.00 1.375 2.250 15.750 14.19 18.75 1.125 12 78
16 23.50 1.438 2.500 18.000 16.19 21.25 1.125 16 101
18 25.00 1.562 2.688 19.875 18.19 22.75 1.250 16 110
20 27.50 1.688 2.875 22.000 20.19 25.00 1.250 20 139
22 29.50 1.812 3.125 24.000 22.19 27.25 1.375 20 162
24 32.00 1.875 3.250 26.125 24.19 29.50 1.375 20 197
26 34.25 2.000 3.375 28.500 26.19 31.75 1.375 24 235
28 36.50 2.062 3.438 30.750 28.19 34.00 1.375 28 269
30 38.75 2.125 3.500 32.750 30.19 36.00 1.375 28 303
32 41.75 2.250 3.625 35.000 32.19 38.50 1.625 28 375
34 43.75 2.312 3.688 37.000 34.19 40.50 1.625 32 401
36 46.00 2.375 3.750 39.250 36.19 42.75 1.625 32 452
38 48.75 2.375 3.750 41.750 38.19 45.25 1.625 32 528
40 50.75 2.500 3.875 43.750 40.19 47.25 1.625 36 573
42 53.00 2.625 4.000 46.000 42.19 49.50 1.625 36 648
44 55.25 2.625 4.000 48.000 44.19 51.75 1.625 40 688
46 57.25 2.688 4.062 50.000 46.19 53.75 1.625 40 733
48 59.50 2.750 4.125 52.250 48.19 56.00 1.625 44 799
50 61.75 2.750 4.125 54.250 50.19 58.25 1.875 44 827
52 64.00 2.875 4.250 56.500 52.19 60.50 1.875 44 922
54 66.25 3.000 4.375 58.750 54.19 62.75 1.875 44 1024
60 73.00 3.125 4.500 65.250 60.19 69.25 1.875 52 1253
66 80.00 3.375 4.875 71.500 66.19 76.00 1.875 52 1623
72 86.50 3.500 5.000 78.500 72.19 82.50 1.875 60 1922
78 93.00 3.875 5.375 84.500 78.19 89.00 2.125 64 2279
84 99.75 3.875 5.375 90.500 84.19 95.50 2.125 64 2586
90 106.50 4.250 5.750 96.750 90.19 102.00 2.438 68 3061
96 113.25 4.250 5.750 102.750 96.19 108.50 2.438 68 3432

AWWA C207 Flanges Dimensions are in inches. Weights are in pounds.
Note: Hub flanges are to be used on pipe that has an OD equal to the nominal pipe size in the first column. *Pressure rating at atmospheric temperature is 275 psi. These flanges have the same OD and drilling as ANSI/ASME B16.1 class 125 cast-iron flanges. In sizes 24in. and smaller, they also match ANSI/ASME B16.5 class 150 standard for steel flanges. The thickness of a class 150 flange from which the raised face has been removed shall be no less than dimension T minus 0.06 in.


C207 Class F Ring Flange (300 psi*)

Nom Size Thickness Drilling Weight
OD Slip-On Blind Bore Bolt Circle Hole Dia No. Holes Slip-on Blind
A T T B C
4 10.00 1.130 1.130 4.57 7.88 0.875 8 18 25
5 11.00 1.210 1.210 5.66 9.25 0.875 8 22 33
6 12.50 1.310 1.310 6.73 10.62 0.875 12 30 46
8 15.00 1.310 1.310 8.73 13.00 1.000 12 40 66
10 17.50 1.500 1.500 10.88 15.25 1.125 16 56 102
12 20.50 1.630 1.630 12.88 17.75 1.250 16 83 152
14 23.00 1.940 1.940 14.19 20.25 1.250 20 128 228
16 25.50 2.140 2.140 16.19 22.50 1.375 20 167 310
18 28.00 2.250 2.250 18.19 24.75 1.375 24 204 392
20 30.50 2.330 2.330 20.19 27.00 1.375 24 247 482
22 33.00 2.500 2.500 22.19 29.25 1.375 24 307 606
24 36.00 2.690 2.690 24.19 32.00 1.625 24 388 776
26 38.25 3.000 3.000 26.19 34.50 1.875 28 451 977
28 40.75 3.130 3.130 28.19 37.00 1.875 28 532 1156
30 43.00 3.150 3.166 30.19 39.25 1.875 28 586 1303
32 45.25 3.250 3.332 32.19 41.50 1.875 28 657 1518
34 47.50 3.380 3.475 34.19 43.50 1.875 28 741 1745
36 50.00 3.460 3.671 36.19 46.00 2.125 32 802 2042
38 52.25 3.500 3.815 38.19 48.00 2.125 32 874 2317
40 54.25 3.630 3.982 40.19 50.25 2.125 36 937 2608
42 57.00 3.810 4.171 42.19 52.75 2.125 36 1103 3015
44 59.25 4.000 4.338 44.19 55.00 2.125 36 1237 3388
46 61.50 4.130 4.505 46.19 57.25 2.125 40 1344 3791
48 65.00 4.500 4.781 48.19 60.75 2.125 40 1718 4494

AWWA C207 Flanges Dimensions are in inches. Weights are in pounds.
Note: *Pressure rating at atmospheric temperature is 300 psi. These flanges have the same OD and drilling as ANSI/ASME B16.1 class 250 cast-iron pipe and flanged fittings.


AWWA C207 Flanges Weight Chart

15mm (1/2") AWWA Flange Weight Chart

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 Flanges PN14 Flanges 95 67 4 M12 14
AS 2129 Flange Table C Flanges 95 67 4 13 14
Table D Flanges 95 67 4 13 14
Table E Flanges 95 67 4 13 14
Table F Flanges 95 67 4 13 14
Table H Flanges 114 83 4 16 17
Table J Flanges 114 83 4 16 17
ANSI B16.5 Flanges ANSI 150 Flanges 89 60 4 13 16
ANSI 300 Flanges 95 67 4 13 16
ANSI 600 Flanges 95 67 4 13 16
ANSI 900 Flanges 121 83 4 19 22
ANSI 1500 Flanges 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 Flanges 80 55 4 M10 11
PN10 Flanges 95 65 4 M12 14
PN16 Flanges 95 65 4 M12 14
PN20 Flanges 90 60.5 4 M14 16
PN25 Flanges 95 65 4 M12 14
PN40 Flanges 95 65 4 M12 14

Get discount on ASTM A105 Carbon Steel Awwa C207 Class B Flanges, Get Awwa C207 Class D Ring Flanges in different sizes, Visit Awwa C207 Class E Hub Flange Manufacturer Factory, Distributors Of ASTM A694 F60 Tabela De Flanges Awwa C207, Duplex Steel Awwa C207 Class F Flanges Pressure Rating Flange AWWA C207 Cl D Exporters.
Avilable in class like awwa c207 class e slip on flange and awwa c207 class d ring flange & Titanium blind flange awwa c207 class d, We maintain good quality stock of Awwa C207 Class E Hub Flange, Suppliers Of awwa c207 flange gasket, Aluminium flange solto awwa c207 Traders, Copper AWWA C207 Flange Manufacturers in India.

MD Exports LLP are a well known manufacturers & suppliers of Stainless Steel Awwa C207 Class D Flange in the steel market and We are an ISO: 9001, 14001 & OHSAS: 18001 certified company in india. Carbon Steel AWWA C207 Steel Pipe Flanges Dimensions are Designed in Accordance with the Industrial Standards And are Fabricated Using Quality Material.

Check AWWA C207 Flange Dimensions

© MD Exports LLP. All rights reserved. Manufacturer, Supplier, Distributor, Stockholder, Dealer, Traders, Wholesaler, importer, exporter of Forgings And Flanges, Pipe Fittings in Mumbai, India. Website Designed & SEO by MD Exports LLP.

Our Global Dealers And Distributors Steel Forging In Following Country UAE, Malaysia, Qatar, Venezuela, Canada, Kuwait, Oman, USA.